ASSRA Forum › General › Reloading the Single Shot Rifle › Needed: mechanical breech seater for original 1885
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Needed: mechanical breech seater for original 1885 (Read 945 times)
hopkinskid
Junior Member
**
Offline


ASSRA Board Member

Posts: 64
Location: Hopkins, MI
Joined: May 12th, 2020
Needed: mechanical breech seater for original 1885
Jun 25th, 2022 at 7:47am
Print Post  
Hi all. Newbie here. I have a .33-47 on a 1917 Win high wall action. I fashioned a breech seater from a fire formed .32-40 brass and 5/16" brass rod. I can get it to breech seat the NOE tapered bullets I'm casting (25:1), but only by tapping fairly hard on the seater with a dowel and mallet. The bullets are showing accuracy promise with 15.0 grains of IMR 4227, so I think I'm going to be happy with them. Where can I get a mechanical breech seater so I can put the mallet away?
  
Back to top
 
IP Logged
 
TRowe
Full Member
***
Offline



Posts: 174
Joined: Sep 4th, 2017
Re: Needed: mechanical breech seater for original 1885
Reply #1 - Jun 25th, 2022 at 9:47am
Print Post  
Bill Barglof makes the similar to a Weber phone 563 357 3242
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1573
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: Needed: mechanical breech seater for original 1885
Reply #2 - Jun 25th, 2022 at 10:56am
Print Post  
BPjack here makes nice ones.i use one of his on my HW 33-47. It was originally at 32-40 seater but it was very easy with his system just to drill out one of the primer pockets from a fireformed case out of my rifle.
  
Back to top
 
IP Logged
 
hopkinskid
Junior Member
**
Offline


ASSRA Board Member

Posts: 64
Location: Hopkins, MI
Joined: May 12th, 2020
Re: Needed: mechanical breech seater for original 1885
Reply #3 - Jun 30th, 2022 at 7:55pm
Print Post  
Thanks for the info, guys!
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4029
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Needed: mechanical breech seater for original 1885
Reply #4 - Jul 4th, 2022 at 10:57am
Print Post  
Willis (singleshot) Gregory made the one for my high wall and it works very well.  I don’t know whether he is still making them, but it’s worth a PM.  He’s still active on this forum. 
Froggie
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.3476 seconds.