ASSRA Forum - .32-20 ammo and components

ASSRA Forum › General › General Discussion › .32-20 ammo and components

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

.32-20 ammo and components (Read 2372 times)

colt45sa Junior Member Offline Posts: 57 Joined: Feb 5^th, 2021	.32-20 ammo and components May 25^th, 2022 at 9:48am	Print Post
	Could I ask all of you who shoot .32-20 to contact Starline and ask them to resume manufacture of the cartridges. I've been looking high and low for brass from any of the manufacturers and can't find it anywhere. With enough requests from users, they may just possibly decide to produce a quantity. I'd like to buy a couple hundred for my own use.


	IP Logged

1Hawkeye Junior Member Offline Posts: 60 Joined: Jun 29^th, 2019	Re: .32-20 ammo and components Reply #1 - May 28^th, 2022 at 12:50am	Print Post
	Its a nice thought but starline does what starline wants to do and dosen't really care what we want. They would rather make .224 valkerie and 6.5 creedmore brass than keep the folks who made them the company they are. Iv'e been waiting over a year for a couple of the older calibers to go into production and my last phone call I was basicly told will get to it when WE feel like it.


	IP Logged

bucksnort Full Member Offline Posts: 144 Location: Vancouver, WA Joined: Jun 8^th, 2014	Re: .32-20 ammo and components Reply #2 - May 28^th, 2022 at 2:41am	Print Post
	Inquired via FB is they see any .32-20 runs in the near future. They do not...


	IP Logged

notlwonk Full Member Offline Posts: 158 Location: Coventry CT Joined: Dec 18^th, 2006	Re: .32-20 ammo and components Reply #3 - May 28^th, 2022 at 7:40am	Print Post
	There is plenty available on gunbroker, past history shows they sell at around $1 each.


	IP Logged

colt45sa Junior Member Offline Posts: 57 Joined: Feb 5^th, 2021	Re: .32-20 ammo and components Reply #4 - May 28^th, 2022 at 12:30pm	Print Post
	I look at GB all the time, and I just finished looking again today. What I've found is offered or has been bid to $2.20 to $3.50 per round. Thankfully I found some used brass for about $1.00 a cartridge which I can reload. I'm just going to have to limit my shooting of that caliber~!!


	IP Logged

ISS Oldtimer Offline Posts: 570 Joined: Feb 24^th, 2013	Re: .32-20 ammo and components Reply #5 - May 28^th, 2022 at 11:56pm	Print Post
	Me too. I got a really handy Police Positive 4" barreled 32-20. My wife loves shooting it, not much recoil. My suggestion: contact CPA. Gail's 32-32 CPA cartridge is just a 32-20 with the case opened up for .321" bullets. Rich


	IP Logged

colt45sa Junior Member Offline Posts: 57 Joined: Feb 5^th, 2021	Re: .32-20 ammo and components Reply #6 - Jun 16^th, 2022 at 10:03am	Print Post
	notlwonk wrote on May 28^th, 2022 at 7:40am: There is plenty available on gunbroker, past history shows they sell at around $1 each. I watch GB daily and have yet to see $1.00 per round. I don't know about "plenty", but I do see quite a bit at $150 per box and that works out to be $3 per round. The least I've been able to buy it for was $1.30, then I had to pay shipping and SALES TAX on top of that~!


	IP Logged

s.s.jeff Junior Member Offline Posts: 63 Location: Appleton Joined: Aug 13^th, 2006	Re: .32-20 ammo and components Reply #7 - Jun 16^th, 2022 at 11:17pm	Print Post
	Colt45sa PM sent


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10624 Joined: Apr 8^th, 2009	Re: .32-20 ammo and components Reply #8 - Jun 17^th, 2022 at 10:45am	Print Post
	" My suggestion: contact CPA. Gail's 32-32 CPA cartridge is just a 32-20 with the case opened up for .321" bullets. " Does that not also use the same 32-20 cases that are hard to get.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

oughtsix Global Moderator ASSRA Board Member Offline Posts: 1231 Location: Columbus Joined: May 31^st, 2009	Re: .32-20 ammo and components Reply #9 - Jun 17^th, 2022 at 1:07pm	Print Post
	*This Topic was moved here from Rifle Photos* [move by] oughtsix.**

	Life Member ASSRA, OGCA & TSGC I'm all in favor of keeping dangerous weapons out the hands of fools. Let's start with typewriters........ Frank Lloyd Wright
	IP Logged

George Babits Frequent Elocutionist Offline Posts: 1079 Joined: Sep 27^th, 2012	Re: .32-20 ammo and components Reply #10 - Jun 17^th, 2022 at 6:30pm	Print Post
	When you say $1/round are you talking about loaded ammunition or brass? I've got a lot of 32-20 brass, but I also have 4 rifles that use it. Am I sitting on a gold mine? George


	IP Logged

RayH Oldtimer Offline ASSRA # 10880 Posts: 741 Location: Oldest City, FL Joined: Jan 4^th, 2012	Re: .32-20 ammo and components Reply #11 - Jun 18^th, 2022 at 8:02am	Print Post
	If anyone is interested in good, clean, fired-multiple-time .32-20 CPA brass, please PM me. I have several hundred rounds that will be available end-of July or early August. (It's in FL - I'm in N/C). I'll contact you as soon as I return to FL for a quick visit. Price will be <$.50/per round + USPS Priority shipping. 1st PM gets 1st call. Personal check will be fine.

	In GOD We Trust
	IP Logged

Grand slam Senior Forum Member Offline Posts: 317 Location: Mountains of E. Tennessee Joined: Jun 7^th, 2015	Re: .32-20 ammo and components Reply #12 - Jun 22^nd, 2022 at 12:14pm	Print Post
	Ray, I’m interestested. Will send a pm. Cheers Richard


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.4033 seconds.