ASSRA Forum › General › General Discussion › changing alloy mix
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic changing alloy mix (Read 1127 times)
Mick B
Frequent Elocutionist
*****
Offline



Posts: 1007
Location: 19 Ian Nicol St watson ACT aus
Joined: Apr 11th, 2013
changing alloy mix
May 20th, 2022 at 4:08am
Print Post  
I made up a batch of 25-1 alloy  to try in my 40-65 to compare with the 20-1 I had been using, as there was nod difference in  accuracy I  have decided to return the mix back to 20-1.
My question is, how much tin must I add to get back from 25-1 to 20-1. I have about 15kg of the 25-1 alloy on hand.
Cheers
Mike
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4239
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: changing alloy mix
Reply #1 - May 20th, 2022 at 9:16am
Print Post  
Mike:

25:1 = 1/26 or 3.85% tin
20:1 = 1/21 or 4.76% tin

So 4.76%-3.85% = need to add 0.91% tin

Weigh how much 25:1 alloy you have and multiply it by 0.91% to determine how much tin you need to add.

15 kg. (33 lb.) x .0091 = need to add 0.1365 kg. or 136.5 gm. (0.30 lb.) of tin

Does not matter if you use Imperial or Metric units of measure.

Dave
« Last Edit: May 20th, 2022 at 9:38am by Schuetzendave »  
Back to top
 
IP Logged
 
Mick B
Frequent Elocutionist
*****
Offline



Posts: 1007
Location: 19 Ian Nicol St watson ACT aus
Joined: Apr 11th, 2013
Re: changing alloy mix
Reply #2 - May 24th, 2022 at 8:34pm
Print Post  
I recently asked for a way to change the 25-1 alloy mix I have from 25-1 to 20-1, I received a vary nice reply which unfortunately is a bit beyond my maths ability to try.
I am now re posting with more info as to the amount of alloy I have in my melting pot and asking how much tin I need to add to the pot to get the existing mixture down from 25-1 to 20-1. 
Currently there is approximately 20 lb of lead in the pot so how much tin do I need to add either in grams or ounces.
Sorry for being so dumb, old age is my excuse.
Mike.
PS  As I'm shooting fixed BP loads we don't have to be exact, just approximate will do fine.
  
Back to top
 
IP Logged
 
MikeT
Senior Forum Member
****
Offline



Posts: 295
Location: St. Cloud, MN
Joined: Sep 7th, 2005
Re: changing alloy mix
Reply #3 - May 24th, 2022 at 10:25pm
Print Post  
Add 3.2 oz of tin.

Keep on hav'n fun!
MikeT
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4239
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: changing alloy mix
Reply #4 - May 24th, 2022 at 11:52pm
Print Post  
20 lb. x .0091 = .182 lb. tin x 16 oz./lb. = 2.9 oz. tin
  
Back to top
 
IP Logged
 
Mick B
Frequent Elocutionist
*****
Offline



Posts: 1007
Location: 19 Ian Nicol St watson ACT aus
Joined: Apr 11th, 2013
Re: changing alloy mix
Reply #5 - May 25th, 2022 at 7:33pm
Print Post  
Thanks all
Mike
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.0330 seconds.