Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Winchester 1885 in .25-35 (Read 4074 times)
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Winchester 1885 in .25-35
Reply #15 - May 5th, 2022 at 7:10pm
Print Post  
Thank you Chris and an 8 or 10 twist would be very competitive with that same Mos bullet. 
I was actually thinking it might have been to slow and why I had asked.
  

" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Spud
Oldtimer
*****
Offline



Posts: 504
Location: Australia Oz
Joined: Feb 24th, 2005
Re: Winchester 1885 in .25-35
Reply #16 - May 5th, 2022 at 8:24pm
Print Post  
Gunlaker, sorry to hear that you missed out on that HW in .25/35. Keep looking, that rifle/cartridge combo is real fun to shoot but they are tough to find. 
Corresponding with Bert H he says...."
There were (64) rifles made in 25-35 WCF that can be lettered, and I have found (9) more thus far in the 110000 - 140000 serial number range.  That brings the total number verified to (73), and I suspect that there may be another dozen or so of them out there yet undiscovered."
After many years of searching I've only seen 2 of them out here in Oz as the .25/35 never really was a popular cartridge. 
Mine was a well used farm rifle with a "good" bore and a 26" barrel but I grabbed it as soon as I found it.  While it is a bit rough on the exterior it shoots really well with the 117 gr Hornady RN and even better with the 100 gr Sierra spitzer (under an inch at 100 yds with the Lyman 103 sight). Photo shows the first test fire group with a load I cobbled together. I haven't shot cast bullets with it yet but have found a RCBS 100 gr FNGC mould that I will test out. 
Pete
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2327
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Winchester 1885 in .25-35
Reply #17 - May 5th, 2022 at 10:14pm
Print Post  
John I originally expected it'd be slower too!   

Spud I guess I missed it by a day.  I put off having a look at it until I'd done a bunch of reading on it then it was too late.  I imagine that these rifles are part of an estate sale that was put on consignment at the local gun store.  There is one in .219 Donaldson Wasp, one in .40-82, and a nice low wall in .22LR.  Only the .40-82 is original as the others were restocked.  Very nicely done, but with wider forearms.

Chris.
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Winchester 1885 in .25-35
Reply #18 - May 6th, 2022 at 1:41pm
Print Post  
Spud on your target was the high shot possibly your first and a cold bore shot?
  

" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Spud
Oldtimer
*****
Offline



Posts: 504
Location: Australia Oz
Joined: Feb 24th, 2005
Re: Winchester 1885 in .25-35
Reply #19 - May 8th, 2022 at 4:56am
Print Post  
Joe, I really can't remember if that flyer was the first shot, was possibly a sighter as that was the first group I shot with this rifle after cleaning the bore. It was real dirty and I gave it a good scrub with a bronze bush & solvent followed by the JB treatment. It finished up shiny with slightly worn rifling. I was surprised how well the rifle shot with minimal load development. I really like the 25/35 WCF as cartridge and it is ideally suited to the HW, great fun to shoot.
Pete
  
Back to top
 
IP Logged
 
ISS
Oldtimer
*****
Offline



Posts: 570
Joined: Feb 24th, 2013
Re: Winchester 1885 in .25-35
Reply #20 - May 9th, 2022 at 4:28am
Print Post  
I have a sporterized (or, bastardized; depends on your outlook) Borchardt Al Story built for a friend in 25-35.  It has the Borchardt factory double set trigger set.  I bought it and another he had in 6.5x57R.  He made me a deal on the two, so they came to live here.

If you shoot jacketed bullets, the cartridge would be super for Antelope or Whitetail, even black bear.

Good Luck!

Rich
  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: Winchester 1885 in .25-35
Reply #21 - May 9th, 2022 at 8:31am
Print Post  
Gunlaker, unless there's an inlaid metal accessory, forearms that are too wide for your tastes can be slimmed.

Bill Lawrence
  
Back to top
 
IP Logged
 
Poorhouse
Junior Member
**
Offline


NRA Life, ASSRA Life

Posts: 86
Location: New Hampster
Joined: Aug 1st, 2007
Re: Winchester 1885 in .25-35
Reply #22 - Jun 4th, 2022 at 4:21pm
Print Post  
I have had two.25-35 HW's, now only one.  Action is a take-down model with original engraving that letters.  Have not shot it.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint