Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) How I transport gear to the range…. (Read 2986 times)
Otony
Senior Forum Member
****
Offline



Posts: 324
Location: Bandon, Oregon
Joined: Jun 5th, 2021
How I transport gear to the range….
Oct 6th, 2021 at 11:01pm
Print Post  
It’s surely not a wooden machinist’s box, but it works for me!

This is the setup I’ve come to favor after many trials with different boxes and bags. The only thing missing is my spotting scope and surveyors tripod. BTW, I have a pvc tube strapped to one of the legs on the tripod that stores my cleaning rod. The spotting scope rides in a padded storage container from Home Depot.
  

Otony
Back to top
 
IP Logged
 
Otony
Senior Forum Member
****
Offline



Posts: 324
Location: Bandon, Oregon
Joined: Jun 5th, 2021
Re: How I transport gear to the range….
Reply #1 - Oct 6th, 2021 at 11:05pm
Print Post  
My wife made the leather elbow bag, along with two nylon ones
  

Otony
Back to top
 
IP Logged
 
Jeff_Schultz
ASSRA Board Member
*****
Offline



Posts: 1659
Location: Ransomville, NY
Joined: Apr 25th, 2004
Re: How I transport gear to the range….
Reply #2 - Oct 7th, 2021 at 10:45am
Print Post  
Nice.
  

"We have met the enemy and he is us." Pogo

“There is no situation so bad that it cannot be made worse."

  Confidence- The feeling you get before you fully understand the situation.
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4164
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: How I transport gear to the range….
Reply #3 - Oct 7th, 2021 at 12:04pm
Print Post  
Looks really good, Otony.  I've just about settled on using that same front pedestal and am having a hard time finding a carrier it likes.  I'll have to look into that RIGID™ unit.  are the boxes and cart available separately or only as a unit?

Froggie
  
Back to top
 
IP Logged
 
Otony
Senior Forum Member
****
Offline



Posts: 324
Location: Bandon, Oregon
Joined: Jun 5th, 2021
Re: How I transport gear to the range….
Reply #4 - Oct 7th, 2021 at 12:16pm
Print Post  
Froggie,

That is four separate boxes from Ridgid. The bottom box is the largest, followed by two middle boxes, then the “milk crate” style on top. Each one locks together.

The dolly is made by Harper, it is reinforced nylon for the most part.

I originally had a Ridgid bottom box that had its own wheels and a collapsible handle, but the wheels were plastic rather than pneumatic. It didn’t roll as smoothly on gravel as the Harper does, and the handle was iffy at best. I replaced it with the bottom box you see here, and along with the Harper dolly it has proven to be both secure and smooth.

Edited to add that all the different Ridgid boxes are available at Home Depot (I believe they own the brand). I ordered the Harper dolly from a seller on eBay
« Last Edit: Oct 7th, 2021 at 6:39pm by Otony »  

Otony
Back to top
 
IP Logged
 
Chuckster
Frequent Elocutionist
*****
Offline



Posts: 2311
Location: Colorado
Joined: May 15th, 2008
Re: How I transport gear to the range….
Reply #5 - Oct 7th, 2021 at 12:29pm
Print Post  
That will work, good idea. Finally got my stuff down to a shooting box and one Rubbermaid tub.
Took a folding adjustable muzzle rest and a different spotting scope stand, but it all fits including the spotting scope.
Rifles, cartridges, and  cleaning rods separate.
Chuck
  
Back to top
 
IP Logged
 
Otony
Senior Forum Member
****
Offline



Posts: 324
Location: Bandon, Oregon
Joined: Jun 5th, 2021
Re: How I transport gear to the range….
Reply #6 - Oct 7th, 2021 at 12:30pm
Print Post  
A couple of better (?) pictures…

My wife made those three bags using some goatskin I had plus a few pieces of leftover cordura nylon from a sewing job she did for Martin Archery here in town. I bought a 10 pound bag of plastic pellets that looked for all the world like grains of brown rice! It works perfectly, packs tightly and has enough heft to actually be useful. All told those three bags cost me $19.95!
« Last Edit: Oct 7th, 2021 at 7:28pm by Otony »  

Otony
Back to top
 
IP Logged
 
Fritz
Oldtimer
*****
Offline



Posts: 518
Location: Texas
Joined: Jun 27th, 2008
Re: How I transport gear to the range….
Reply #7 - Oct 7th, 2021 at 4:39pm
Print Post  
Nice setup and if it works for you that in itself what matters!
  
Back to top
YIM  
IP Logged
 
Grumpy gumpy
Full Member
***
Offline



Posts: 214
Location: australia
Joined: Jul 6th, 2016
Re: How I transport gear to the range….
Reply #8 - Oct 7th, 2021 at 6:27pm
Print Post  
Every time I see something like this I think I really should do something like it, this beats the multiple trips back and forth from the car that I do currently, but I would think that I would need to make it out of wood and weld up an aluminium trolley and then it gets all too hard and I forgot about it......till the next time I see a trolley system like this....and it starts again.....
Cheesy

Gumpy
  
Back to top
 
IP Logged
 
Otony
Senior Forum Member
****
Offline



Posts: 324
Location: Bandon, Oregon
Joined: Jun 5th, 2021
Re: How I transport gear to the range….
Reply #9 - Oct 7th, 2021 at 7:23pm
Print Post  
Grumpy gumpy wrote on Oct 7th, 2021 at 6:27pm:
Every time I see something like this I think I really should do something like it, this beats the multiple trips back and forth from the car that I do currently, but I would think that I would need to make it out of wood and weld up an aluminium trolley and then it gets all too hard and I forgot about it......till the next time I see a trolley system like this....and it starts again.....
Cheesy

Gumpy


I was in the same boat for far too long. A trip to the range usually included multiple bags and boxes…and inevitably something was forgotten. 

The worst was when I drove several hours with a couple of friends, a trunkful of guns, and plenty of ammunition except for the one revolver I really wanted to shoot. After that I began experimenting with this system AND a check off list!

This seems to work, and the four boxes disconnect from each other quite easily, so loading them up is a breeze. 

I really gave a lot of thought to buying a Gerstner box, or one of the copies thereof, but buying all these Ridgid products and the Harper dolly was less expensive overall. Not as aesthetically pleasing perhaps nor as “period” in appearance, but I am very well satisfied.
  

Otony
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: How I transport gear to the range….
Reply #10 - Oct 7th, 2021 at 7:24pm
Print Post  
What shooting discipline are you actually talking about?
  

" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Otony
Senior Forum Member
****
Offline



Posts: 324
Location: Bandon, Oregon
Joined: Jun 5th, 2021
Re: How I transport gear to the range….
Reply #11 - Oct 7th, 2021 at 7:37pm
Print Post  
JLouis wrote on Oct 7th, 2021 at 7:24pm:
What shooting discipline are you actually talking about?


I use this for all my range trips, regardless of what we are shooting. But I visit this forum because I’m a beginner at shooting with single shot rifles and cast bullets. I have a Uberti 1885 low wall that I am bringing to John Taylor next month. It is a .22 Hornet but will be lined to .25-20 with a 1 in 10” twist. I’ve been collecting reloading equipment and various items in order to start my journey.

I originally was going to build up a Martini action in .25-20, but two deals for rifles fell through in succession so I jumped on the Low Wall when it became available.

I currently live in Walla Walla, Washington so there are a fair number of shoots going on within reasonable driving distances.

Edited to add that I’ve owned several Shiloh Sharps, a .45-70 and a .50-70, plus a Swedish rolling block that John Taylor barreled for me in .50-70. I’m not a complete neophyte to cast bullet shooting, but everything I did before was just to have fun, I never competed.

Reading here has taught me quite a bit, and hopefully I will be able to put it to use and enjoy time with like minded folks. I don’t know if I can be competitive, but I’m happy to try.
« Last Edit: Oct 7th, 2021 at 7:43pm by Otony »  

Otony
Back to top
 
IP Logged
 
oldman46
Senior Forum Member
****
Offline



Posts: 424
Joined: Sep 21st, 2016
Re: How I transport gear to the range….
Reply #12 - Oct 7th, 2021 at 11:59pm
Print Post  
Gerstner boxes are works of art. And are priced accordingly. Kennedy machinists boxes are in the same (almost) league. My wife has a fabric cart she uses for groceries that we load up when taking all that food and stuff out of the truck. Harbor Freight also sells them.Best part is that it folds up when not used. Have a yellow Harding instrument case I used when going to the range. Threw my back out once moving it out of the truck to the bench. Weighed it and was 65 pounds. Went to see a buddy at work and he found a smaller instrument case that held everything I needed for the range that ended up at 30 pounds. Frank
  
Back to top
 
IP Logged
 
yamoon
Frequent Elocutionist
*****
Offline


NRA Life, ASSRA , GGCA,
MCA

Posts: 1006
Location: Junction City Kansas
Joined: Feb 11th, 2012
Re: How I transport gear to the range….
Reply #13 - Oct 8th, 2021 at 11:35am
Print Post  
My range is 120 miles one way. Seems every time I go, I have forgotten to take something important. I need to do a box like that & leave it packed. Nice set up.
Mike
  
Back to top
 
IP Logged
 
Red Cent
Senior Forum Member
****
Offline



Posts: 316
Location: Benton, KY byway of WV, VA, NC
Joined: Dec 25th, 2016
Re: How I transport gear to the range….
Reply #14 - Oct 9th, 2021 at 7:18pm
Print Post  
(You need to Login or Register to view media files and links)

and a check list.

Paper and steel in NC.
  

Life is too short to argue with stupid people
and/or drink cheap booze
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint