ASSRA Forum - Ballard #6 1/2 1st model straight grip Rigby

ASSRA Forum › General › Collecting Single Shot Rifles › Ballard #6 1/2 1st model straight grip Rigby

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 [2]

Ballard #6 1/2 1st model straight grip Rigby (Read 4164 times)

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16269 Location: Oregon Joined: Feb 2^nd, 2009	Re: Ballard #6 1/2 1st model straight grip Rigby Reply #15 - Oct 9^th, 2021 at 10:46am	Print Post
	Cbashooter wrote on Oct 8^th, 2021 at 11:10pm: marlinguy wrote on Oct 7^th, 2021 at 8:31pm: Spud wrote on Oct 7^th, 2021 at 6:28pm: Really nice rifle Vall. It's a bonus when they come with a well cared for bore. I'd be interested in the bore specs. when you get around to slugging it ..I wonder why they phased out the .40-65 in favor of the .40-63? I like that straight stock too....hope the "lucky moon" works for you (I'd say it already has in snagging that rifle!). Spud I have four Ballard rifles in the .40-63 and one in .40-85 that are all between .410"-.411" groove dia. But this one is slightly larger at .412" groove. I'll have to check my .40 caliber molds and see if any drop that large? I may have an old Ideal that casts pretty close to that.its a long RN.i can't recall the number right now. I shoot anything from as light as 315 grs. to just over 400 grs. in mine. But the smaller case capacity and slower twist rate of the Ballards in .40-63 prefer a bullet down around the 315-350 gr. weight. Plus with it being an offhand rifle the heavier bullets aren't as much fun to shoot offhand.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

rkba2nd Frequent Elocutionist Offline Posts: 1945 Location: earth Joined: Feb 16^th, 2009	Re: Ballard #6 1/2 1st model straight grip Rigby Reply #16 - Oct 9^th, 2021 at 3:14pm	Print Post
	marlinguy More fun than sitting down and shooting from a bench I would have to say!!

	rkba2nd
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16269 Location: Oregon Joined: Feb 2^nd, 2009	Re: Ballard #6 1/2 1st model straight grip Rigby Reply #17 - Oct 9^th, 2021 at 3:55pm	Print Post
	rkba2nd wrote on Oct 9^th, 2021 at 3:14pm: marlinguy More fun than sitting down and shooting from a bench I would have to say!! Certainly more challenging! But I've often wondered why some early makers of fine schuetzen rifles like Marlin and Remington chose these larger .40 caliber cartridges for offhand rifles? They seemed more fitting to Mid Range rifles, than to offhand rifles? They're not terribly hard on the shooter, but certainly more so than the smaller cartridges, like the .38-50 Ballard or .32-40 Ballard.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

Page completed in 1.2476 seconds.