ASSRA Forum - Stevens M54 28-30 info help

ASSRA Forum › General › Collecting Single Shot Rifles › Stevens M54 28-30 info help

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Hot Topic (More than 10 Replies)

Stevens M54 28-30 info help (Read 3915 times)

rugerfishhuntnut Newbie Offline Posts: 4 Location: Central PA / FL Joined: May 21^st, 2020	Stevens M54 28-30 info help Jul 13^th, 2021 at 2:40pm	Print Post
	Picked up a M54 a while ago and finally got around to cleaning and fixing it. It is missing a firing pin and retaining screw/bolt, and had a broken hammer which I got tig welded and filed back to healt but not sure it will last long. SN is 4504, so was wondering a couple things... 1) what year was it produced , 2) were serial numbers shared across all the models ie 44, 44 1/2, 54, etc. 3) where can I find parts??? Thanks in advance.. Tom
	« Last Edit: Jul 13^th, 2021 at 3:07pm by rugerfishhuntnut »

	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Stevens M54 28-30 info help Reply #1 - Jul 13^th, 2021 at 3:03pm	Print Post
	Call Gail at CPA Rifles for parts. Including a new hammer.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

rugerfishhuntnut Newbie Offline Posts: 4 Location: Central PA / FL Joined: May 21^st, 2020	Re: Stevens M54 28-30 info help Reply #2 - Jul 13^th, 2021 at 3:08pm	Print Post
	next pic


	IP Logged

rugerfishhuntnut Newbie Offline Posts: 4 Location: Central PA / FL Joined: May 21^st, 2020	Re: Stevens M54 28-30 info help Reply #3 - Jul 13^th, 2021 at 3:08pm	Print Post
	last pic


	IP Logged

Sure shot Oldtimer Offline Posts: 913 Location: East central Iowa Joined: Jun 22^nd, 2020	Re: Stevens M54 28-30 info help Reply #4 - Jul 13^th, 2021 at 4:53pm	Print Post
	Very nice rifle! Your model 54 has the 44 action, I am afraid finding an early high grade model 44 hammer, cut for a fly for double set triggers is going to be very difficult. Finding a ready made centerfire firing pin for a 44 is also going to be difficult, I don’t know of anyone making them. The firing pin retaining screw will be easy to find, CPA has them in stock. Could a hammer from a 44 1/2 cut for a fly be made to work?


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Stevens M54 28-30 info help Reply #5 - Jul 13^th, 2021 at 8:04pm	Print Post
	CPA also has the parts also needed for the 44 action. One only needs to call about what is currently in stock. And if currently out when will the part or parts needed be back into it their stock.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

scharfe Oldtimer Offline A good plan today beats a perfect plan tomorrow. Posts: 542 Location: ny / pa line Joined: Dec 18^th, 2006	Re: Stevens M54 28-30 info help Reply #6 - Jul 13^th, 2021 at 9:56pm	Print Post
	serial # with 4 digits and a 28/30 don't jive. The 28/30 came out around 1901, just be fore the introduction of the 44 1/2.


	IP Logged

scharfe Oldtimer Offline A good plan today beats a perfect plan tomorrow. Posts: 542 Location: ny / pa line Joined: Dec 18^th, 2006	Re: Stevens M54 28-30 info help Reply #7 - Jul 13^th, 2021 at 10:52pm	Print Post
	The 28/30 introduced 1901, 44 serial #'s for 1901 vintage 44's would be much higher than 4 digits in 1901.


	IP Logged

gewehrfreund Senior Forum Member Offline Posts: 437 Location: Cortland Joined: Jan 24^th, 2005	Re: Stevens M54 28-30 info help Reply #8 - Jul 14^th, 2021 at 7:28am	Print Post
	I've handled this rifle and it's a real gem. What Tom didn't mention is that it will be at the OCGA show in Wilmington this coming weekend, and as far as I know, for sale.


	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens M54 28-30 info help Reply #9 - Jul 14^th, 2021 at 8:46pm	Print Post
	The DST assemblies for the 44 and the 44-1/2 are almost identical. The hammer I see pictured has the fly offset to the side, while the 44-1/2 has the fly in a saw cut centered. A considerably better design. I'll lay odds that a 44-1/2 hammer will work fine. Want to get this one into my database. Particularly want to know the shank diameter of the lever and breechlock pivot screws. The s/n is very early, but if it was rebarrelled the old s/n would be stamped on the new barrel.
	« Last Edit: Jul 14^th, 2021 at 8:57pm by uscra112 »
	<div class=
	IP Logged

830singleshot Senior Forum Member Offline Posts: 408 Location: Texas Joined: Feb 11^th, 2007	Re: Stevens M54 28-30 info help Reply #10 - Jul 15^th, 2021 at 12:19am	Print Post
	I'm certainly no authority, but I would have thought if this rifle left Stevens as a center-fire, it would be the thicker frame (I can't tell) and have a lugged hammer. Is the breach block recessed for a lug?

	J. Scott McCash&&New Braunfels, TX&&830-237-2376&&jsmccash@yahoo.com
	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens M54 28-30 info help Reply #11 - Jul 15^th, 2021 at 3:33am	Print Post
	If it was originally a .25 centerfire or a .32-20 it would not have had the lug, even if it were not a DST. Also, that s/n falls before the lugged hammer became commonplace for the larger cartridges. (Somewhere around s/n 5000) All 44 breechblocks can accept a lugged hammer. The lug falls into the cut made for the upper end of the link. Assuming equal pressures, the bolt thrust of the .28-30 is exactly the same or slightly less than the .32-20. Rebarrelling to the .28-30 would have been entirely reasonable even without a lug.

	<div class=
	IP Logged

Dellet Frequent Elocutionist Online Posts: 1100 Joined: May 19^th, 2017	Re: Stevens M54 28-30 info help Reply #12 - Jul 15^th, 2021 at 8:58am	Print Post
	I have a 7 ‘clock extractor 45, that appears to have been re-bored, by Stevens. The original chambering is marked under the the forearm, new chambering where you would expect it. Same on a 107
	« Last Edit: Jul 15^th, 2021 at 9:16am by Dellet »

	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens M54 28-30 info help Reply #13 - Jul 15^th, 2021 at 11:56am	Print Post
	Worth checking that out! 'Course those marks wouldn't be there if it was a new barrel.

	<div class=
	IP Logged

TRowe Full Member Offline Posts: 178 Joined: Sep 4^th, 2017	Re: Stevens M54 28-30 info help Reply #14 - Jul 17^th, 2021 at 8:42pm	Print Post
	CPA doesn't have firing pins, don't know about other parts. Think this is a Steve Durran project. Parts don't go well between 44 and 44 1/2 actions. That 107 is really neat. I have never seen one. Stevens announced the .28-30 in 1900.


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.9844 seconds.