I need help identifying my just purchased Unertl scope. Its 19 in long. The objective is non adjustable, and is 2-1/2 in diameter. The tube is 13/16 in dia. The eye piece is 1-1/4 in dia. It is 10 power and is #28558. The mounts look like a hex nut on the outside, and the adjustment is a knurled wheal between the mount body and the tube. The eye piece has a couple of dings on the rim, where it has been dropped. It looks like it will work ok, but was considering trying to work out the dings but don't want to damage the threads. Any idea on model information or where I might send it to to get the dings removed from the eyepiece rim? Thanks!

Unertl call it the 1 1/4 inch Varmint.

1/1/4 Varmint , This one has a calibrated head.

oneatatime wrote on Apr 22^nd, 2021 at 1:21pm:

He also said it was 19" long. A 2" Ultra Varmint would have been 24 " long.

SORRY!!!!!!!!! My mistake from the start! It has a 1-1/2 inch objective. Sorry again and thanks for all who tried to help.

rkba2nd, you are correct. All dimentions above are outside and with a tape measure. That's all I had handy. Anyone know where I might find any parts for a Unertl?

Optical Service Co in NM will do it all and reasonably fast if you catch them at the right time. This is Bill Ackerman’s shop which is run by his daughter Cheryl. Ackerman was Weaver’s main man when they were in Texas.  I used to use Parsons and Premier in VA, I think, but they are either out of business or I undependable anymore. Good luck

rkba2nd wrote on Apr 23^rd, 2021 at 1:27pm:


You’re right and I forgot they shy away from repairs. But I know they will restore reticles and will rebuild and restore the old high quality Weavers. I had them do a T-20 and bump to 32X and it’s as crisp and sharp as any of my turret top bench and varmint scopes. But good luck cause scope mechanics are drifting off the edges.