ASSRA Forum › General › Collecting Single Shot Rifles › Stahl target rifle
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Stahl target rifle (Read 2894 times)
Patrick Chadwick
Participating Member
*
Offline



Posts: 40
Joined: Oct 5th, 2020
Stahl target rifle
Nov 12th, 2020 at 3:52am
Print Post  
This is the "older brother" of Westerner's Stahl. Note that it also has the mounting rail for a quadrant backsight.

« Last Edit: Nov 12th, 2020 at 4:15am by Patrick Chadwick »  
Back to top
 
IP Logged
 
Patrick Chadwick
Participating Member
*
Offline



Posts: 40
Joined: Oct 5th, 2020
Re: Stahl target rifle
Reply #1 - Nov 12th, 2020 at 3:54am
Print Post  
OMG-where's the backsight!

Here it is:
  
Back to top
 
IP Logged
 
Patrick Chadwick
Participating Member
*
Offline



Posts: 40
Joined: Oct 5th, 2020
Re: Stahl target rifle
Reply #2 - Nov 12th, 2020 at 3:55am
Print Post  
Nicely engraved action, with safety.
  
Back to top
 
IP Logged
 
ww
Full Member
***
Offline



Posts: 176
Joined: Apr 18th, 2017
Re: Stahl target rifle
Reply #3 - Nov 12th, 2020 at 8:25am
Print Post  
Very nice!
That these rifles have survived the better part of a century and a half and remain in the condition they're in today is a tribute to there care over the years. If only they could talk.
Beautiful rifle.
I've wondered the purpose of the rod under the barrel. Cleaning? Cartridge removal without spilling powder into the action with a finger seated in a fired case stop-ring bullet? 
WW
  
Back to top
 
IP Logged
 
Patrick Chadwick
Participating Member
*
Offline



Posts: 40
Joined: Oct 5th, 2020
Re: Stahl target rifle
Reply #4 - Nov 12th, 2020 at 10:21am
Print Post  
"I've wondered the purpose of the rod under the barrel. Cleaning? Cartridge removal without spilling powder into the action with a finger seated in a fired case stop-ring bullet?"

I have wondered about that as well. It certainly is chambered to take a stop-ring bullet, if that is a clue. It wasn't until I discovered that I actually (without realising it) had had a passable stop ring bullet mold for years (!!!) and cast a few, that I was able to shoot it without wrecking the cases.

Alas! This discovery came just as the ranges closed down (again!) because of Covid, while I was in the fire-forming phase of case preparation. So it's going to be a while before I can make further progress.

But I really like the "lollipop" backsight. A very neat arrangement.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11515
Location: Why, out West of course
Joined: May 29th, 2006
Re: Stahl target rifle
Reply #5 - Nov 12th, 2020 at 12:46pm
Print Post  
Neat rifle, Pat! Killer engraving. Never saw one with a folding lolipop sight before.

The Stahl is a very old design. The rod under the barrel is a wiping rod. Stahls were built when BP was the only powder. Most were 9mm caliber. My Stahl has the hole in the forestock for a wiping rod but no pipes, being rebarreled to 8.15X46R before 1908.  It is now a 8.15X52R.  Mine is marked "Fr Jung & Sohne, Suhl" on the barrel.

Mine has a windgauge front sight. Takes a tiny little clock key.  Grin
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
BlackPowderLove
Junior Member
**
Offline



Posts: 62
Location: Western Uplands of Wisconsin
Joined: Jul 12th, 2020
Re: Stahl target rifle
Reply #6 - Nov 12th, 2020 at 2:03pm
Print Post  
Beauty!!!
  
“Tradition is not to preserve the ashes but to pass on the flame”
Back to top
WWW  
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11515
Location: Why, out West of course
Joined: May 29th, 2006
Re: Stahl target rifle
Reply #7 - Nov 12th, 2020 at 2:26pm
Print Post  
Another Stahl, lol.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Online



Posts: 3913
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Stahl target rifle
Reply #8 - Nov 12th, 2020 at 2:50pm
Print Post  
Joe, what in the world have you inStahled on that poor rifle?
  
Back to top
 
IP Logged
 
Patrick Chadwick
Participating Member
*
Offline



Posts: 40
Joined: Oct 5th, 2020
Re: Stahl target rifle
Reply #9 - Nov 12th, 2020 at 2:55pm
Print Post  
This 3D printing business is really getting out of hand! Grin

As to my rifle, it's a real Stahl.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11515
Location: Why, out West of course
Joined: May 29th, 2006
Re: Stahl target rifle
Reply #10 - Nov 12th, 2020 at 2:58pm
Print Post  
oneatatime wrote on Nov 12th, 2020 at 2:50pm:
Joe, what in the world have you inStahled on that poor rifle?


Grin Grin Tongue
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Online



Posts: 3913
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Stahl target rifle
Reply #11 - Nov 12th, 2020 at 5:58pm
Print Post  
Ah, B. Stahl my beating heart;-)
Nice tulip, by the way.
  
Back to top
 
IP Logged
 
Patrick Chadwick
Participating Member
*
Offline



Posts: 40
Joined: Oct 5th, 2020
Re: Stahl target rifle
Reply #12 - Nov 13th, 2020 at 2:11am
Print Post  
Look closely - even the safety lever has a floral engraving!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7523 seconds.