Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) Stevens 414 Armoury Model (x2) (Read 4267 times)
freebird
Full Member
***
Offline



Posts: 121
Location: South West France
Joined: Sep 12th, 2014
Stevens 414 Armoury Model (x2)
Oct 25th, 2020 at 8:05am
Print Post  
Hi,
to avoid trolling the "dating Stevens 94 rufles", I will open my own to present you in more detail two Stevens 414.

mostly pictures, as there are allready a host of posts on this "not so rare" rifle (they are not very rare in Europe, so I guess they're pretty everywhere in the USA  Smiley )

(You need to Login or Register to view media files and links)
above 69040
below 74760

(You need to Login or Register to view media files and links)

comparison of buttstock (early/late)

(You need to Login or Register to view media files and links)

casehardening of 74760. judging from the rest of the rifle, this is original to the gun.
  
Back to top
 
IP Logged
 
freebird
Full Member
***
Offline



Posts: 121
Location: South West France
Joined: Sep 12th, 2014
Re: Stevens 414 Armoury Model (x2)
Reply #1 - Oct 25th, 2020 at 8:11am
Print Post  
I've had 69040 for quite som etime, it has been "parker rifled" (relined by A. G. Parker) in the 1930's and shoots beautifully 

(You need to Login or Register to view media files and links)

but when I saw 74760 on a German auction site, I could not resist. The casehardening and bluing seemed original and very good. The gun was "cheap" (less than $300) and it had "alternative" sights which I wanted badly...

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

I believe that the sights alone are worth more than the gun is (they are to me anyway, as I have great hope they will be better on the range than the original 414 ones...)
  
Back to top
 
IP Logged
 
gewehrfreund
Senior Forum Member
****
Offline



Posts: 437
Location: Cortland
Joined: Jan 24th, 2005
Re: Stevens 414 Armoury Model (x2)
Reply #2 - Oct 25th, 2020 at 8:13am
Print Post  
Those are very nice; especially the case hardened example! $300 dollars for that rifle is unheard of!!!
It is rare to find them in that condition here, so it's surprising to see them that well preserved there in Europe.

The receiver aperture sight on your nickeled version is often missing on the 414s that one can find here.

Also, the Lyman tang sight on the second one is rare and the windage adjustable stem is worth a lot of money on this side of the Atlantiqué; much more than what you paid for the entire rifle!
  
Back to top
 
IP Logged
 
freebird
Full Member
***
Offline



Posts: 121
Location: South West France
Joined: Sep 12th, 2014
Re: Stevens 414 Armoury Model (x2)
Reply #3 - Oct 25th, 2020 at 8:42am
Print Post  
there is a catch though... the casehardened exemple has had "homemade" scope rings installed, and the wood cut out to make space, so "collector" value has disappeared. I'll have to deinstall those horrible rings and hope the barrel bluing has not been irremediably damaged  Undecided

but yes, I thought the deal was a bargain at €288 (which I loosely translated into $300).

there are plenty of good deals to be had in Germany yet  Smiley (and even moreso when you compare the prices with those in France)
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Online


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: Stevens 414 Armoury Model (x2)
Reply #4 - Oct 25th, 2020 at 11:24am
Print Post  
288 Euros is $341 US dollars. Still a fantastic bargain!
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Stevens 414 Armoury Model (x2)
Reply #5 - Oct 25th, 2020 at 1:41pm
Print Post  
Thanks for the additional pictures.

*  I kinda like those "homemade" dovetails.  I'd leave 'em on the rifle.  Maybe try to find a scope that will fit 'em.

*  The case hardening pattern is correct original for a Savage-era gun.  Very rare to see one so well preserved in the homeland.  

*  That price is indeed a heck of a steal!  

* Nobody seems to have liked the factory receiver sight very much.  Yet I  seem to remember reading that an American team took stock 414s to Europe in the '30s and won some major tournament, so they can't have been too awful bad!
  

<div class=
Back to top
 
IP Logged
 
Oldman1950
Full Member
***
Offline



Posts: 238
Location: Virginia
Joined: Feb 8th, 2014
Re: Stevens 414 Armoury Model (x2)
Reply #6 - Oct 25th, 2020 at 2:40pm
Print Post  
Stevens 414 ads
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Online



Posts: 3913
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Stevens 414 Armoury Model (x2)
Reply #7 - Oct 25th, 2020 at 4:22pm
Print Post  
You see various claims and years being repeated about the 414 and the Olympics. The fact seems to be that in the 1912 summer Olympics an American, Frederick Hird, took a Gold in the first appearance of the 50 meter rifle, prone event held on Thursday, July 4. The American team, of which he was a member, received Bronze medals for the 25 meter team small-bore rifle match held on Friday, July 5, and the 50 m team small-bore rifle match held on Wednesday, July 3. At 25 meters, the American team scored 881 to Sweden's 925 and Britain's 917 and at 50 meters the American team scored 744 to Britain's 762 and Sweden's 748. 4 nations competed at 25 meters and 6 at 50 meters. In the 25 meter singles match (any position, disappearing targets, up for 3 seconds down for 5), Sweden came in 1st, 2nd, and 3rd. High US was Hird in 8th place of 36 entrants. The 50 meter team match was prone but this was reported "In Olympic Shooting, Crossman described the results of this match as follows, “The Americans had not trained especially for the 50-meter prone team match, but they had some hopes of winning with their Stevens M414 single-shot, falling-block rifles. They soon found the sights inadequate. The rules specified the prone position for this match, with no artificial support. The officials ruled that the ground was obviously not artificial and that the shooters therefore could rest their rifles on the ground. Strangely, only the Swedish team seemed to know about this, and they took full advantage of the knowledge, resting both the left hand and forearm and the butt of the rifle on the firing line. The English raised quite a fuss about this, but lost and went on to win by shooting ability, 762 to the Swedes’ 748, with the United States four points behind, for a third out of the six teams." Interesting that the matches were held in Stockholm, Sweden;-) The only two of these matches to survive in the next Olympics (1920 - 1916 was, of course, cancelled) were the 50 meter individual and team ones which were now "standing" and the US cleaned house. No mention of their rifles but it appears that all the members of the rifle team were military. With some more research I found this link to a report by a Dutch competitor: (You need to Login or Register to view media files and links);
It is quite interesting and mentions Winchesters.
« Last Edit: Oct 25th, 2020 at 5:25pm by oneatatime »  
Back to top
 
IP Logged
 
freebird
Full Member
***
Offline



Posts: 121
Location: South West France
Joined: Sep 12th, 2014
Re: Stevens 414 Armoury Model (x2)
Reply #8 - Oct 26th, 2020 at 3:15am
Print Post  
I'll take a picture of the scope rings, and you'll see why I want them gone... they are rough filed and crooked...  Undecided (which I had not seen on the auction picture... my eyes were fixed on the Lyman sights and the general condition of the gun  Smiley)

It might be my 50 years old eyes, but the original sight and rocky mountain front are not the best possible combination for target shooting. They are excellent for iron plate or silhouette though. 

many thanks to all for the additionnal informations on the 414.
  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: Stevens 414 Armoury Model (x2)
Reply #9 - Oct 26th, 2020 at 7:40am
Print Post  
Didn't anyone ever make a better replacement receiver sight specifically for the 414?

Also, if the bright parts of the earlier 414 really are nickel plated (rather than nicely polished "white"), and if the plating is factory rather than an English "improvement". that's a very rare rifle.
                                                                                                               
Bill Lawrence
« Last Edit: Oct 26th, 2020 at 7:49am by MrTipUp »  
Back to top
 
IP Logged
 
Oldman1950
Full Member
***
Offline



Posts: 238
Location: Virginia
Joined: Feb 8th, 2014
Re: Stevens 414 Armoury Model (x2)
Reply #10 - Oct 26th, 2020 at 11:54am
Print Post  
Here is the rear sight on my 414. I have had this rifle for 30 years and this sight was installed when I received. Not sure which model it is.
  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: Stevens 414 Armoury Model (x2)
Reply #11 - Oct 26th, 2020 at 12:33pm
Print Post  
That's a nice sight; but it doesn't fit into the original cut-out or use the original mounting screw.  In other words, what I'm looking for is a "drop-in" replacement for the factory sight.

Bill Lawrence
  
Back to top
 
IP Logged
 
freebird
Full Member
***
Offline



Posts: 121
Location: South West France
Joined: Sep 12th, 2014
Re: Stevens 414 Armoury Model (x2)
Reply #12 - Oct 26th, 2020 at 1:31pm
Print Post  
I honestly can't say if the receiver of 69040 is nickeled or polished in white... I'd bet for nickel as it does not show any sign of rust, only slightly tarnished on the under tang (is that the right way to say it?)

However, even if I was 100% certain of a nickel finsh, there is no way to know if it is original to the gun or if it was refinished in England in the 30's... 

May be the proof marks might give me a hint under a macroscope (to know if they were struck before or after the nickel finish ?
  
Back to top
 
IP Logged
 
slumlord44
Frequent Elocutionist
*****
Offline



Posts: 2850
Location: Lebanon, Illinois 62254
Joined: Dec 21st, 2007
Re: Stevens 414 Armoury Model (x2)
Reply #13 - Oct 26th, 2020 at 10:35pm
Print Post  
To my knowledge they were never nickel plated. Blued or case hardened depending on date of manufacture.
  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: Stevens 414 Armoury Model (x2)
Reply #14 - Oct 26th, 2020 at 10:49pm
Print Post  
And can we presume that once Savage took Stevens over that the days of special order guns was no more?

Also, the point about proof marks is well made.  Specifically, would the gun have been proofed both before and after it was sleeved (I'm assuming that it arrived in England as-new)?

Bill Lawrence
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint