ASSRA Forum › General › Reloading the Single Shot Rifle › PID Temperature Controller
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic PID Temperature Controller (Read 2752 times)
Two-Bit Charlie
Participating Member
*
Offline



Posts: 45
Location: Sheboygan, WI
Joined: Mar 21st, 2015
PID Temperature Controller
Oct 10th, 2020 at 2:03pm
Print Post  
I would like to get a PID Controller for my lead pots. I know I saw some posts about them a while ago, but I can't seem to find them. I would rather buy one than make it myself. Any information would be appreciated.

Reed Van Ness
  
Back to top
 
IP Logged
 
craigster
Oldtimer
*****
Offline



Posts: 685
Location: lost coast CA
Joined: Feb 20th, 2011
Re: PID Temperature Controller
Reply #1 - Oct 10th, 2020 at 5:40pm
Print Post  
Good article on them here:

(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2917
Location: Southern NJ
Joined: Aug 1st, 2010
Re: PID Temperature Controller
Reply #2 - Oct 11th, 2020 at 7:22pm
Print Post  
If doing yourself, you want something like this:
(You need to Login or Register to view media files and links)
The thermocouple it comes with is not useful for a pot. I used an Omega KT-SS-18G-12. Type K.

Have a friend who has been looking for an RCBS Easy Melt and told me a couple of days ago that they are out of stock everywhere he has looked. Likely made in China, so no surprise.
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
debass
Participating Member
*
Offline



Posts: 14
Location: northern California
Joined: Nov 23rd, 2008
Re: PID Temperature Controller
Reply #3 - Nov 17th, 2020 at 2:13am
Print Post  
There is a guy on the cast boolits web site that sells them. They work great. I paid $125 for mine. I have 4 pots I use it for. Just remember to take out the probe when you're done so you can use it for the next pot or leave it in if you're going to fire up the same pot again.
  
Back to top
 
IP Logged
 
bnice
Frequent Elocutionist
*****
Offline



Posts: 1851
Location: Iowa
Joined: Nov 30th, 2006
Re: PID Temperature Controller
Reply #4 - Nov 17th, 2020 at 4:26pm
Print Post  
You could buy thermocouples for each pot and add the two prong plugins instead. Just be sure to get the plug ends that are for the type of thermocouple (probably k type) thermo couples are cheap on ebay
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7291 seconds.