ASSRA Forum › General › Reloading the Single Shot Rifle › Custom FL sizer die makers?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Custom FL sizer die makers? (Read 2063 times)
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1570
Location: Eastern Wa.
Joined: Mar 31st, 2018
Custom FL sizer die makers?
Sep 25th, 2020 at 7:22pm
Print Post  
I can't get through to the usual suspects to have a fl die(or set) made based on fired cases.
Its looks like its basically a 22 Jet necked to  25 used with a breech seat throat .the cases I got with the gun are starting to fail.
  
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 1933
Location: earth
Joined: Feb 16th, 2009
Re: Custom FL sizer die makers?
Reply #1 - Sep 25th, 2020 at 9:16pm
Print Post  
You might try CH-4D they may even have one in stock. If not, they can make one for you, with supplied fired cases. I have been surprised at how many odd-ball dies they have on hand.
  
rkba2nd
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16091
Location: Oregon
Joined: Feb 2nd, 2009
Re: Custom FL sizer die makers?
Reply #2 - Sep 25th, 2020 at 10:30pm
Print Post  
Guessing that getting a response in today's environment will be tough with many custom die makers. It might have to wait until things get back to normal.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1570
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: Custom FL sizer die makers?
Reply #3 - Sep 25th, 2020 at 10:34pm
Print Post  
marlinguy wrote on Sep 25th, 2020 at 10:30pm:
Guessing that getting a response in today's environment will be tough with many custom die makers. It might have to wait until things get back to normal.

That seems to be the issue. Some have suspended custom work.
  
Back to top
 
IP Logged
 
Dellet
Frequent Elocutionist
*****
Offline



Posts: 1090
Joined: May 19th, 2017
Re: Custom FL sizer die makers?
Reply #4 - Sep 25th, 2020 at 11:43pm
Print Post  
If you haven’t tried them, Whidden does a nice job. Generally 2-3 months.
(You need to Login or Register to view media files and links)

  
Back to top
 
IP Logged
 
Longdistance1
Senior Forum Member
****
Offline



Posts: 429
Location: Amidon, ND
Joined: Feb 11th, 2013
Re: Custom FL sizer die makers?
Reply #5 - Sep 26th, 2020 at 12:26am
Print Post  
There is a set of form and reloading dies .22 jet on ebay now 5 die set buy it now @$119 . One of the dies should be about right for a .25  caliber neck or go on down to .22 and expand back to .25 or fire form to .25 
LD1
Type in form dies in reloading.
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1570
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: Custom FL sizer die makers?
Reply #6 - Sep 26th, 2020 at 10:07am
Print Post  
Dellet wrote on Sep 25th, 2020 at 11:43pm:
If you haven’t tried them, Whidden does a nice job. Generally 2-3 months.
(You need to Login or Register to view media files and links)



Thanks, I've seen their site but didn't know much about them.ill give them a shot 
  
Back to top
 
IP Logged
 
Bulseyetom
Oldtimer
*****
Offline



Posts: 955
Location: Santa Maria, Ca
Joined: Oct 31st, 2010
Re: Custom FL sizer die makers?
Reply #7 - Sep 26th, 2020 at 3:59pm
Print Post  
I sent whidden a few cases for a 6mm-30/30 Imp Wildcat for my Rolling Block and got a great resizing die.  I use Vickerman seating dies,  Tom
  
Back to top
Twitter  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5673 seconds.