ASSRA Forum › General › Reloading the Single Shot Rifle › .22 Maynard extra long
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic .22 Maynard extra long (Read 2902 times)
ballardhepburnmich
ASSRA Board Member
*****
Offline



Posts: 598
Location: Scotts,mi.
Joined: May 20th, 2015
.22 Maynard extra long
Sep 8th, 2020 at 10:50pm
Print Post  
Anybody have any ideas on smokeless loads for. 22 Maynard extra long using 40 to 50 gr. bullets. Any suggestions on powder type  and amount  would be appreciated. 
Thank you, Lee Gibbs Pres.ASSRA
  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: .22 Maynard extra long
Reply #1 - Sep 9th, 2020 at 1:04pm
Print Post  
Comparable to  22 long rifle which I reload .. 2.0gr of Bullseye and 6gr FFg black powder with 46gr bullets

Grant's load was 4.6 grains of 4759 with a 45 grain bullet from a .22 WCF mould, Remington #6 1/2 primer.    (Page 127 of More Single Shot Rifles.)  He claimed  1 1/2 inch groups at 100 from a Maynard.
« Last Edit: Sep 9th, 2020 at 1:21pm by »  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: .22 Maynard extra long
Reply #2 - Sep 10th, 2020 at 12:54pm
Print Post  
Lee, another load I use in the 22 LR ... 4.5gr Swiss Null-B ... 1352 FPS
  
Back to top
 
IP Logged
 
ballardhepburnmich
ASSRA Board Member
*****
Offline



Posts: 598
Location: Scotts,mi.
Joined: May 20th, 2015
Re: .22 Maynard extra long
Reply #3 - Sep 10th, 2020 at 10:23pm
Print Post  
Thank you, Johnboy.
Lee Gibbs
  
Back to top
 
IP Logged
 
ron
Oldtimer
*****
Offline



Posts: 576
Location: Augusta Maine
Joined: Nov 15th, 2009
Re: .22 Maynard extra long
Reply #4 - Sep 11th, 2020 at 7:07am
Print Post  
I posted the same question about 2 years ago. John Bly responded with load info. I looked for it but have yet to find it, life got in the way.

Buffalo Arms did offer reformed cases. I tried to reform .17 cal CF, but new at that end of the sport. Any info on case forming would a big help.
ron
  
Back to top
 
IP Logged
 
ballardhepburnmich
ASSRA Board Member
*****
Offline



Posts: 598
Location: Scotts,mi.
Joined: May 20th, 2015
Re: .22 Maynard extra long
Reply #5 - Sep 12th, 2020 at 11:41pm
Print Post  
What I am using is .22 Cooper Centerfire  Magnum  brass.
Lee Gibbs Pres.ASSRA
  
Back to top
 
IP Logged
 
GT
Frequent Elocutionist
*****
Offline



Posts: 2040
Location: Northeast Wyoming
Joined: Jun 28th, 2015
Re: .22 Maynard extra long
Reply #6 - Sep 13th, 2020 at 12:37am
Print Post  
Lee,
Recently I stumbled on a couple pounds of this, it was going well with the primed 22rf brass I picked up.
"Vihtavuori’s 3N37 handgun powder was originally developed for .22 rimfire cartridges, but has since proven to be very versatile and desirable within all competitive handgun shooting disciplines."

I don't recall my loads exactly but it is a published load and it works well.
Greg
  
"To invent, you need a good imagination and a pile of junk"  T. A. Edison
"The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
Back to top
 
IP Logged
 
ratseye
Full Member
***
Offline



Posts: 202
Location: Eastern, PA
Joined: Feb 28th, 2017
Re: .22 Maynard extra long
Reply #7 - Sep 13th, 2020 at 5:58am
Print Post  
I have had some excellent results in a Rook rifle with Viht 3N37 and now trying it in several others. Thanks, ratseye
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.3130 seconds.