ASSRA Forum › General › Collecting Single Shot Rifles › Stevens model 44, cal 38-40, s/n 27xxx
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) Stevens model 44, cal 38-40, s/n 27xxx (Read 6634 times)
chowboy
Newbie
*
Offline



Posts: 2
Joined: Mar 23rd, 2018
Stevens model 44, cal 38-40, s/n 27xxx
May 2nd, 2020 at 7:45pm
Print Post  
Barrel is properly marked.  Anyone know more or less when this might have been built?  I know the records were burned,   but any guesses are helpful.  Also, does anyone suspect the gun as been rebarreled/Rechamberedin this caliber?
  
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #1 - May 2nd, 2020 at 11:14pm
Print Post  
I have never seen or even heard of a 44 in .38-40, (I'm assuming you mean the Winchester version, not the Remington-Hepburn). 

Stevens started chambering the .38-55 in the 1894-1896 series having three-digit model numbers. They stopped building the 44 with .32-40 and .38-55 barrels in 1903.  I have quite a few .32-40s and a couple of .38-55s logged in the range of 20,000 to 31,000, with the highest # seen so far 30924.  Best guess for yours is 1901, but it's only an educated guess.   

Unlikely that it's been rebarreled if it's got Stevens markings. If it's truly a .38-40, it would have to be a custom order.  Look for the little "lug" on the face of the hammer, which slips under the rear of the breechblock when the hammer is down.  This feature was only supplied for the .32-40 and .48-55. The 44 toggle design is too weak for either cartridge, and ditto the .38-40; this lug was a band-aid fix.  If you choose to shoot it anyway, use only very light subsonic loads and light bullets.
« Last Edit: May 3rd, 2020 at 12:15am by uscra112 »  
<div class=
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #2 - May 2nd, 2020 at 11:20pm
Print Post  
For my Model 44 database, I'd like to know:

Complete serial number
What sights it's fitted with
Whether it has the lug or not

Photos would be welcome.

Phil W.
  
<div class=
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #3 - May 3rd, 2020 at 12:14am
Print Post  
I had to go look.

The 1900 catalog does offer the Model 45 "Range Rifle" in .38-40 WCF so yours is probably that, and not custom.  Look at the face of the receiver, with the forearm taken off to confirm.
  
<div class=
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7573
Location: Virginia
Joined: Apr 23rd, 2004
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #4 - Sep 17th, 2020 at 6:29pm
Print Post  
38/40 WCF lot less cartridge than 32/40 or 38/55. Does not suprise me Stevens would chamber the 44 for it.

Boats
  
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #5 - Sep 17th, 2020 at 7:19pm
Print Post  
FWIW, I have one in 44-40

Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #6 - Sep 17th, 2020 at 8:56pm
Print Post  
Way, way back, the .44-40 and later the .38-40, both introduced for the relatively weak 1873 Winchester, were black powder cartridges and were deemed safe for the various revolvers that also shot them.  Therefore, I'd think you could've gotten away chambering a Model 44 for those cartridges.

HOWEVER with the coming of the 1892 Winchester, and especially smokeless powder, several ammo manufactures began beefing those rounds up, marketing them as "high velocity" or sometimes just "rifle" loads (their other versions assumed to be still safe for "pistols").  Those more potent rounds, whether factory- or hand-loaded, would've likely shot a Model 44 loose in short order, even with a lugged hammer.

Bill Lawrence
  
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #7 - Sep 17th, 2020 at 10:58pm
Print Post  
The diameter of the case head is what determines the thrust against the breechblock, all else being equal.   The 44-40 and 38-40 share a head diameter of .471", which is even larger than the .32-40/.38-55 case at .422".   No surprise that the .44-40 and .38-40 Model 44s are so rare today.   No matter how many they may have sold, guns of those chamberings would have shot themselves to rubble in a very short time, even at black powder pressures. 
  
<div class=
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #8 - Sep 17th, 2020 at 11:05pm
Print Post  
Aaron, I don't have your .44-40 in my database.  Would you fill me via P/M?  S/N especially?   

Phil

  
<div class=
Back to top
 
IP Logged
 
OLD TUCK
Senior Forum Member
****
Offline



Posts: 469
Location: Middleborough MA
Joined: Oct 5th, 2017
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #9 - Sep 18th, 2020 at 5:44pm
Print Post  
I have a Model 92 Takedown in 38-40. It had been shortened to just over 18" barrel. I planned to re-barrel it as the bore was kind of rough. But just for fun decided to shoot it. Loaded with a stiff load of 2400 and Jacketed bullets it shot cats eye size groups at 75 yds. Forgot about re-barrel and hunted with it in Maine.
Killed two deer with it and they went down like they had been pole axed and never got a leg under them again. Pleasant memories. Will keep it. FITZ, OLD TUCK Smiley
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7573
Location: Virginia
Joined: Apr 23rd, 2004
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #10 - Sep 18th, 2020 at 10:37pm
Print Post  
Published 38/40 loads about a third of 32/40 & 38/55 pressure.  It’s true somebody can load one heavy but stick to Alliant cowboy action data , Unique & lead bullets, its a very mild cartridge. I shoot a lot of 38/40 in a original Marlin 1894 using that data. Neck size only no case body expansion.

Having said that 44 is not a strong action, some say do not shoot them at all. Or any 19th century rifle.

Boats
  
Back to top
 
IP Logged
 
TRowe
Full Member
***
Offline



Posts: 178
Joined: Sep 4th, 2017
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #11 - Nov 5th, 2020 at 5:14pm
Print Post  
Both the .38-40 and .44-40 cartridges were listed in the early catalogs. Very rare to find rifles chambered for them. The .38-55 had a lot more horse power.  I know of two tip-ups chambered for the .45 2 4/10 Sharps
  
Back to top
 
IP Logged
 
ballardhepburnmich
ASSRA Board Member
*****
Offline



Posts: 598
Location: Scotts,mi.
Joined: May 20th, 2015
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #12 - Nov 5th, 2020 at 11:52pm
Print Post  
I have a friend that was a full-time gunsmith for over 50 years that barreled a 44 with a. 454 barrel and chambered it in .45 long colt. He has hosted big bore matches for 20 years and has put over 3000 rounds through that 44 and it's still just as tight as could be. Not advocating, just saying. I have seen and fired the gun many times. 
Lee Gibbs
  
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #13 - Nov 6th, 2020 at 2:03am
Print Post  
Nominal pressures about the same as .44-40.  Did his gun have the lugged hammer?
  
<div class=
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: Stevens model 44, cal 38-40, s/n 27xxx
Reply #14 - Nov 6th, 2020 at 10:57am
Print Post  
I've owned Stevens 44's in both .38-40 and .44-40, factory chambered and matching numbers. Both were in nice condition, and tight as new lock up.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.5053 seconds.