ASSRA Forum › General › Reloading the Single Shot Rifle › Primer residue
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Primer residue (Read 1730 times)
KFW
Oldtimer
*****
Offline



Posts: 634
Location: Wyoming
Joined: Dec 18th, 2016
Primer residue
Jan 9th, 2020 at 12:19pm
Print Post  
Fired a bunch of primers today in the shop while fiddling with a Ballard. Was amazed at how much soot was in bore, and the brass primer pockets where just as dirty and crusty as a full load.

So now wondering....accuracy aside, are some brands cleaner than others? I have cci, federal match and some win. have never tried Remington.

Today is curiosity  day!
kw
  
Back to top
 
IP Logged
 
Just Jim
Full Member
***
Offline



Posts: 212
Joined: May 11th, 2019
Re: Primer residue
Reply #1 - Jan 9th, 2020 at 2:15pm
Print Post  
Some may be produce less residue, but I'm not sure the difference will be measurable. 

I used to shoot a lot of the old Speer "plastic bullets" indoors. It did leave the pistols quite sooty, and I tried a couple diffrent makes of primers but could see no real difference. 

Oh, and one of those plastic .38 wadcutters WILL penetrate cleanly through a roll-up fiberglass garage door. Don't ask me how I know.  Embarrassed
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Primer residue
Reply #2 - Jan 9th, 2020 at 3:27pm
Print Post  
I have popped a variety over the years and they all seemed to be the same. For those who have never done it you would be amazed at how much fouling comes from just one. It's also abrasive and why one should not push it out the muzzle it will bell it over time.
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
rgchristensen
Frequent Elocutionist
*****
Online



Posts: 1190
Joined: Jan 2nd, 2014
Re: Primer residue
Reply #3 - Jan 9th, 2020 at 5:06pm
Print Post  
       Different brands leave different residue.   Not mentioning brands, I shot maybe 45-50 shots/case not cleaning the pockets, with no problem. Changed to another brand for a season, and be the end of the season, there was enough residue accumulated that pistol primers would not seat fully in rifle cases.

CHRIS
RGChristensen
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6093 seconds.