ASSRA Forum › General › Reloading the Single Shot Rifle › Roberson Cartridge Co in Cranking Out New Brass
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Roberson Cartridge Co in Cranking Out New Brass (Read 3636 times)
John Boy
Ex Member


Roberson Cartridge Co in Cranking Out New Brass
Dec 26th, 2019 at 4:33pm
Print Post  
... seems like a new cartridge every week ...
(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #1 - Dec 26th, 2019 at 5:03pm
Print Post  
Ouch and they cost $5.42 each and above most folks means.
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
KFW
Oldtimer
*****
Offline



Posts: 634
Location: Wyoming
Joined: Dec 18th, 2016
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #2 - Dec 26th, 2019 at 5:14pm
Print Post  
I saw their brass at the Quigley, its beautiful work! I was interested in some more 40-90 Ballard cases, until the price was revealed. I know it is expensive to make, but will have to live with the 20 RMCC cases I have now.
kw
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18078
Location: Oregon
Joined: Feb 2nd, 2009
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #3 - Dec 27th, 2019 at 9:55am
Print Post  
I'm glad they're making brass, but so far nine I can afford to buy.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #4 - Dec 27th, 2019 at 1:23pm
Print Post  
KFW wrote on Dec 26th, 2019 at 5:14pm:
I was interested in some more 40-90 Ballard cases, until the price was revealed. I know it is expensive to make, but will have to live with the 20 RMCC cases I have now.
kw


I've had great success producing "shooter" brass for my .40-90 Ballard Pacific fire-forming it from 9.3x74R Norma brass, and they are costing me less than $1 per round including the cost of the components I use to fire-form them.  Just sayin' ...

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4164
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #5 - Dec 29th, 2019 at 4:14pm
Print Post  
The problem I have with my Pacific Ballard in 40-90 and 9.3X74 Norma brass is the rims... my extractor wouldn't quite pick up the rim of a fired round, even though the unformed, unfired brass would lift out nicely, once the brass had formed to the chamber there was enough resistance that the tip of the extractor just skipped over the rim.  Does anybody have a quick and dirty fix, or will I have to fit another extractor?

Froggie
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4484
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #6 - Dec 29th, 2019 at 5:51pm
Print Post  
I happened to be looking at the reprint of the Sears, Roebuck and Company 1897 catalog and noted that 40-90 brass was $2.26. That's per 100.
  
Back to top
 
IP Logged
 
desert-dude
Senior Forum Member
****
Offline



Posts: 439
Location: Selah
Joined: Jul 23rd, 2013
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #7 - Dec 30th, 2019 at 11:42am
Print Post  
That $2.26 scales to about $70 today. That still comes out 70 cents/case vs what the real going price is today.
  
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #8 - Dec 30th, 2019 at 2:57pm
Print Post  
Green_Frog wrote on Dec 29th, 2019 at 4:14pm:
The problem I have with my Pacific Ballard in 40-90 and 9.3X74 Norma brass is the rims... my extractor wouldn't quite pick up the rim of a fired round, even though the unformed, unfired brass would lift out nicely, once the brass had formed to the chamber there was enough resistance that the tip of the extractor just skipped over the rim.  Does anybody have a quick and dirty fix, or will I have to fit another extractor?
Froggie


I've been lucky in that my Pacific will extract the fire-formed 9.3x74R Norma cases as long as I am diligent in pushing the extractor flush to the chamber and making sure that the rim is above the extractor.  I've had to knock the odd fired case out of my rifle with a cleaning rod, but not very often.  Even if I need to knock out the odd fired case it still beats the high cost of buying expensive .40-90 brass!
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18078
Location: Oregon
Joined: Feb 2nd, 2009
Re: Roberson Cartridge Co in Cranking Out New Brass
Reply #9 - Dec 30th, 2019 at 8:35pm
Print Post  
Green_Frog wrote on Dec 29th, 2019 at 4:14pm:
The problem I have with my Pacific Ballard in 40-90 and 9.3X74 Norma brass is the rims... my extractor wouldn't quite pick up the rim of a fired round, even though the unformed, unfired brass would lift out nicely, once the brass had formed to the chamber there was enough resistance that the tip of the extractor just skipped over the rim.  Does anybody have a quick and dirty fix, or will I have to fit another extractor?

Froggie


Charlie my .40-85 Pacific extracts them fine, but chambering I have to be careful not to let the rims slip past the extractor. If I had one with a slightly worn extractor I'd take the extractor out and have the tip built up slightly by tig welding, and then shape it down until it was a close fit the the cartridge. It's cheaper and easier than fitting a new one.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1410 seconds.