ASSRA Forum - Static Cling on my Scale, Help!

ASSRA Forum › General › Reloading the Single Shot Rifle › Static Cling on my Scale, Help!

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Static Cling on my Scale, Help! (Read 1420 times)

n.r.davis Oldtimer Offline Posts: 613 Joined: Dec 3^rd, 2015	Static Cling on my Scale, Help! Dec 20^th, 2019 at 1:12pm	Print Post
	This summer my scale would hold zero. Tried to use it this week and the charges that I would check, every 5th one, from throwing would get heavier. Yup zero had drifted. Plastic pan on the scale and sometimes you could see the powder floating on the sides of the pan. Raised the scale 4" off the table and put my fist under the pan, not touching, but the pan was drawn to my fist. Do I need to Ground the Scale and my Powder Hopper as well? Thanks for any insight. David


	IP Logged

Kurt_701 Frequent Elocutionist Offline Posts: 1055 Location: Missouri Joined: May 20^th, 2004	Re: Static Cling on my Scale, Help! Reply #1 - Dec 20^th, 2019 at 1:23pm	Print Post
	Try wiping it with a clothes drier anti-static sheet. It works for me.

	M-14 3rd Battalion 27th Marines RVN 68'69'
	IP Logged

n.r.davis Oldtimer Offline Posts: 613 Joined: Dec 3^rd, 2015	Re: Static Cling on my Scale, Help! Reply #2 - Dec 21^st, 2019 at 9:09am	Print Post
	Keep it Simple..... Worked like a charm, thanks!


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.7691 seconds.