(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Molds! (Read 3150 times)
irish66
Oldtimer
*****
Offline



Posts: 546
Location: newbraunfels
Joined: Apr 7th, 2007
Molds!
Dec 13th, 2019 at 6:05pm
Print Post  
Who is out ther these days that makes boolit molds?
Need a 38-55 for breech seating
« Last Edit: Dec 13th, 2019 at 9:27pm by irish66 »  
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1301
Location: Arizona
Joined: Sep 8th, 2006
Re: Molds!
Reply #1 - Dec 13th, 2019 at 8:03pm
Print Post  
Steve Brooks
at
Tru-Bore Moulds
brooksmoulds.com
  
Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
GTalk  
IP Logged
 
Joe_S
Frequent Elocutionist
*****
Offline



Posts: 1108
Joined: Jun 29th, 2004
Re: Molds!
Reply #2 - Dec 13th, 2019 at 10:09pm
Print Post  
Accurate Molds
  
Back to top
 
IP Logged
 
Fogman
Full Member
***
Offline



Posts: 155
Joined: Mar 10th, 2016
Re: Molds!
Reply #3 - Dec 13th, 2019 at 10:32pm
Print Post  
Buffalo Arms will make what you want too.
  
Back to top
 
IP Logged
 
Schutzenbob
Frequent Elocutionist
*****
Offline


Rheinisch-Westfälisc
hen Sprengstoff-Fabriken

Posts: 2286
Location: Nightingale, California
Joined: Oct 24th, 2005
Re: Molds!
Reply #4 - Dec 13th, 2019 at 11:34pm
Print Post  
If you want to try out a 38-55 and not spend money $$$, Lee makes a very nice aluminum 38 mold;
  
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 2104
Location: earth
Joined: Feb 16th, 2009
Re: Molds!
Reply #5 - Dec 14th, 2019 at 12:21am
Print Post  
NOE also
  
rkba2nd
Back to top
 
IP Logged
 
Jeff Houck
Junior Member
**
Offline



Posts: 78
Location: Pocatello
Joined: Jan 11th, 2014
Re: Molds!
Reply #6 - Dec 14th, 2019 at 9:42am
Print Post  
LBT -  Lead Bullet Technology
Send him a slugging of your chamber and throat up into the bore and he will cut a mold to your sketch/design
  
Jeff Houck
Back to top
YIMAIM  
IP Logged
 
Skalkaho
Oldtimer
*****
Offline



Posts: 866
Location: Montana
Joined: Sep 29th, 2006
Re: Molds!
Reply #7 - Dec 14th, 2019 at 10:16am
Print Post  
Why does the NOE mold have to be SO BIG and heavy  !  He could of cut it in half! Other than that a good mold.
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
GrumpyBear
Full Member
***
Offline



Posts: 139
Location: Western,Pa.
Joined: Sep 30th, 2017
Re: Molds!
Reply #8 - Dec 14th, 2019 at 12:35pm
Print Post  
We probably shouldn't forget about Accurate Molds.

(You need to Login or Register to view media files and links)

Oops missed Joe S's post but will leave mine with the link.
  
Μολὼν λαβέ

Don't pick a fight with an old man. If he is too old to fight, he'll just kill you.

Shash-yazhi -bear-cub

Brian
Back to top
 
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 2104
Location: earth
Joined: Feb 16th, 2009
Re: Molds!
Reply #9 - Dec 14th, 2019 at 1:39pm
Print Post  
Skalkaho -  NOE makes the blocks large to build your upper body strength so that you can hold those heavy schuetzen rifles steady offhand?
  
rkba2nd
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1743 seconds.