ASSRA Forum › General › Reloading the Single Shot Rifle › Source for .32 Ideal Dies and 25-20 Single Shot
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Source for .32 Ideal Dies and 25-20 Single Shot (Read 1858 times)
roller-wall59
Newbie
*
Offline



Posts: 7
Joined: Nov 12th, 2019
Source for .32 Ideal Dies and 25-20 Single Shot
Dec 11th, 2019 at 3:56pm
Print Post  
What suggestions might you all have for sourcing reloading dies for the 32 Ideal and 25-20 SS?
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4482
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Source for .32 Ideal Dies and 25-20 Single Shot
Reply #1 - Dec 11th, 2019 at 7:14pm
Print Post  
If the 25-20 SS brass you have chambers in the rifle you have you'll only be neck sizing so just get 25-20 WCF dies and a number 10 shell holder.
  
Back to top
 
IP Logged
 
JSB30
Senior Forum Member
****
Offline



Posts: 407
Location: Missouri
Joined: Apr 30th, 2011
Re: Source for .32 Ideal Dies and 25-20 Single Shot
Reply #2 - Dec 11th, 2019 at 9:43pm
Print Post  
Midwayusa has 25-20 SS dies for $200
  
Back to top
 
IP Logged
 
Skalkaho
Oldtimer
*****
Offline



Posts: 866
Location: Montana
Joined: Sep 29th, 2006
Re: Source for .32 Ideal Dies and 25-20 Single Shot
Reply #3 - Dec 13th, 2019 at 11:48am
Print Post  
I sold off all my 32 Ideal brass.Had A 32-357 Max reamer made.Cheap brass, never wears out. 1/2 grain difference from my Ideal. It is about 1/4" shorter but larger at the rim.Alittle nicer to chamber with a slight taper over the straight Ideal brass.
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8477 seconds.