(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 32-20 dies (Read 1351 times)
Marlene
Senior Forum Member
****
Offline



Posts: 276
Joined: Oct 30th, 2015
32-20 dies
Nov 9th, 2019 at 4:48pm
Print Post  
Lots of 32-20 dies are set up so tight that you can use a 308 or 312 expander after sizing. That seems to me like over-working the neck if it isn't needed. Anybody know what dies on the market (if any) aren't set up that way?
  
Back to top
 
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3987
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: 32-20 dies
Reply #1 - Nov 9th, 2019 at 7:00pm
Print Post  
the obvious full-length sizer that would size to just what you want will have a replaceable collet of the diameter you want.  Wilson and RCBS do that.  Of course the brass wall thickness comes into play.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
craigster
Oldtimer
*****
Offline



Posts: 823
Location: lost coast CA
Joined: Feb 20th, 2011
Re: 32-20 dies
Reply #2 - Nov 11th, 2019 at 2:56pm
Print Post  
Had a set of Lee, they didn't work all that well. Now using a Lyman 3 die set, work well.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8785 seconds.