ASSRA Forum › General › Reloading the Single Shot Rifle › 40-63 smokeless loads safe for original ballard
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 40-63 smokeless loads safe for original ballard (Read 1437 times)
emmett22405
Full Member
***
Offline



Posts: 164
Location: Virginia
Joined: Sep 21st, 2009
40-63 smokeless loads safe for original ballard
Nov 3rd, 2019 at 8:13am
Print Post  
Skirmisher bud wants to expand his bp horizons on into smokeless for his fine original 40-63 ballard FORGED action. Uses shortened 405 win brass so essentially a 40-70 SS.  I feel about 19 Grains 4759 and a 265 rnfp is ok load but seek additional loads and advice. Thanks
  
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1222
Location: CT
Joined: Dec 14th, 2008
Re: 40-63 smokeless loads safe for original ballard
Reply #1 - Nov 4th, 2019 at 10:29am
Print Post  
i like 4198 about  16 grains to start   art
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Online


Ballards may be weaker,
but they sure are neater!

Posts: 18072
Location: Oregon
Joined: Feb 2nd, 2009
Re: 40-63 smokeless loads safe for original ballard
Reply #2 - Nov 4th, 2019 at 10:34am
Print Post  
I'm also using 4198 in my .40-63 Ballard #4 1//2. But 16 grs. for me has proven to be very poor ignition and burn rate. It leaves a lot of unburned powder in the bore, and poor accuracy. 18.0 gr.-20.0 grs. gives cleaner burning, and better results. But I'm using a 330 gr. RCBS CSA bullet.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
jfeldman
ASSRA Board Member
*****
Offline



Posts: 1120
Location: Imperial Beach, Ca
Joined: Nov 5th, 2005
Re: 40-63 smokeless loads safe for original ballard
Reply #3 - Nov 4th, 2019 at 8:35pm
Print Post  
I used 17.5 gr of IMR 4227 with a breech seated 330 grain bullet and had pretty decent accuracy at 100 yards while fireforming some cut down Nosler 9.3 X 74R brass.

Regards, Joe
  
Back to top
 
IP Logged
 
emmett22405
Full Member
***
Offline



Posts: 164
Location: Virginia
Joined: Sep 21st, 2009
Re: 40-63 smokeless loads safe for original ballard
Reply #4 - Nov 5th, 2019 at 3:04pm
Print Post  
thanks, all
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1769 seconds.