ASSRA Forum - Emmert’s lube in a Lyman 450

ASSRA Forum › General › Reloading the Single Shot Rifle › Emmert’s lube in a Lyman 450

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

Emmert’s lube in a Lyman 450 (Read 1892 times)

Green_Frog Frequent Elocutionist Offline "It ain't easy being green" ASSRA Life #281 Posts: 4164 Location: Lynchburg, VA Joined: Apr 18^th, 2004	Emmert’s lube in a Lyman 450 Sep 16^th, 2019 at 5:49pm	Print Post
	I’ve been using Emmert’s lube for many years as a pan lube, but now I’m heading off in a slightly different direction and am wondering whether with slight or hopefully no modification I can pour it into hollow sticks and use it in one of my Lyman 450s. Of course it’s pretty soft in its original formula (no heat needed ) but if needed I could add a little more beeswax or a even a touch more carnauba if needed(?). Anybody have experience along those lines? Thanks in advance! Froggie


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1826 Location: Central Wi Joined: Dec 20^th, 2007	Re: Emmert’s lube in a Lyman 450 Reply #1 - Sep 16^th, 2019 at 6:21pm	Print Post
	Emmerts works for me in my RCBS Lubersizer. Should work just fine in the Lyman 450. beltfed/arnie


	IP Logged

Jeff_Schultz ASSRA Board Member Offline Posts: 1661 Location: Ransomville, NY Joined: Apr 25^th, 2004	Re: Emmert’s lube in a Lyman 450 Reply #2 - Sep 16^th, 2019 at 6:36pm	Print Post
	No need to make sticks, just pour it into the lubrisizer.

	"We have met the enemy and he is us." Pogo “There is no situation so bad that it cannot be made worse." Confidence- The feeling you get before you fully understand the situation.
	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1826 Location: Central Wi Joined: Dec 20^th, 2007	Re: Emmert’s lube in a Lyman 450 Reply #3 - Sep 16^th, 2019 at 9:09pm	Print Post
	Yup to Jeff Schultz I do pour melted Emmerts into the lubersizer beltfed/arnie


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 18068 Location: Oregon Joined: Feb 2^nd, 2009	Re: Emmert’s lube in a Lyman 450 Reply #4 - Sep 17^th, 2019 at 10:40am	Print Post
	I also pour lube directly into my Lyman lubrisizer. But you can make sticks and not bother making them hollow. They push their own hole through the center easily with softer lube like Emmerts.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

JackHughs Oldtimer Offline Posts: 657 Location: Riverbank Joined: Sep 27^th, 2008	Re: Emmert’s lube in a Lyman 450 Reply #5 - Sep 20^th, 2019 at 4:12pm	Print Post
	This is a great topic. I've used Emmert's lube for a very long time but I've never used it in a lubrisizer. Because of the Crisco and vegetable oil, I've always been concerned that the lube would go rancid if left at room temperature for long periods of time. I store Emmert's lube (and lubed bullets) in the refrigerator. It appears that I've been overly cautious. JackHughs

	The best lack all conviction, while the worst Are full of passionate intensity. W.B. Yeats
	IP Logged

Green_Frog Frequent Elocutionist Offline "It ain't easy being green" ASSRA Life #281 Posts: 4164 Location: Lynchburg, VA Joined: Apr 18^th, 2004	Re: Emmert’s lube in a Lyman 450 Reply #6 - Sep 20^th, 2019 at 9:52pm	Print Post
	I've never left my Emmert's out in hot environments (except when I was out with ammo or bullets at a range on a warm day.) When not in use, the pan of lube and the bullets I have pre-lubed stay in the basement... cool but not like a refrigerator. I've never had a batch go rancid, even after 2-3 years or even more. Froggie


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.1074 seconds.