ASSRA Forum - Martini

ASSRA Forum › General › Rifle Photos › Martini

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

Martini (Read 3451 times)

stevelins Participating Member Offline Posts: 13 Joined: Feb 3^rd, 2012	Martini Apr 18^th, 2019 at 10:39pm	Print Post
	I’ve never posted any pictures so I thought I’d share.


	IP Logged

stevelins Participating Member Offline Posts: 13 Joined: Feb 3^rd, 2012	Re: Martini Reply #1 - Apr 18^th, 2019 at 10:41pm	Print Post
	Sorry about large pictures. I haven’t done this before!


	IP Logged

Joe Do... Oldtimer ASSRA Board Member ASSRA Journal Editor Offline Posts: 583 Location: 'burbs of Chicago Joined: May 19^th, 2012	Re: Martini Reply #2 - Apr 19^th, 2019 at 7:21am	Print Post
	Those are all very nice but that last one (bottom) is my favorite with blond wood and dark mineral lines. Also the stock shape is more traditional. Thanks for sharing!


	IP Logged

ratseye Full Member Offline Posts: 202 Location: Eastern, PA Joined: Feb 28^th, 2017	Re: Martini Reply #3 - Apr 19^th, 2019 at 9:49am	Print Post
	Some sweet little Martini's. What are the calibers, etc? Thanks, ratseye


	IP Logged

stevelins Participating Member Offline Posts: 13 Joined: Feb 3^rd, 2012	Re: Martini Reply #4 - Apr 19^th, 2019 at 10:11am	Print Post
	From left to right: 22lr that I just got, 225 win, fbw is a 17 Ackley bee, and a mashburn bee.


	IP Logged

ratseye Full Member Offline Posts: 202 Location: Eastern, PA Joined: Feb 28^th, 2017	Re: Martini Reply #5 - Apr 19^th, 2019 at 8:36pm	Print Post
	Interesting calibers and they should all shoot quite well. I find the triggers on the Cadets are really quite nice as they are and with a little work can be very fine. I have a soft spot for these actions and the full sized too. Thanks, ratseye


	IP Logged

Remington40x Full Member Offline Posts: 166 Location: Bucks County, PA Joined: Oct 18^th, 2007	Re: Martini Reply #6 - Apr 21^st, 2019 at 9:03pm	Print Post
	Steve: What loads are you using for the .225? I have one in that caliber and have been limiting my shooting of it to lower pressure starter loads because of the relatively thin barrel walls in the portion of the barrel where the threads are located. Thanks. Rem


	YIM AIM IP Logged

stevelins Participating Member Offline Posts: 13 Joined: Feb 3^rd, 2012	Re: Martini Reply #7 - Apr 21^st, 2019 at 11:03pm	Print Post
	I was loading 36 grains of h414 with a 40 v-max. I wasn’t concerned with speed just wanted a safe load that shot and extracted well.


	IP Logged

CptCurl Full Member Offline Posts: 191 Location: Botetourt County, Virginia Joined: Jan 23^rd, 2017	Re: Martini Reply #8 - Apr 22^nd, 2019 at 8:24am	Print Post
	Nice rifles! Mine is not as refined, but I have fun with it. (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) Curl


	IP Logged

Remington40x Full Member Offline Posts: 166 Location: Bucks County, PA Joined: Oct 18^th, 2007	Re: Martini Reply #9 - Apr 22^nd, 2019 at 4:22pm	Print Post
	stevelins wrote on Apr 21^st, 2019 at 11:03pm: I was loading 36 grains of h414 with a 40 v-max. I wasn’t concerned with speed just wanted a safe load that shot and extracted well. Thanks. I've got plenty of both the 414 and the 40 grain V-max, so I'll give it a try.


	YIM AIM IP Logged

stevelins Participating Member Offline Posts: 13 Joined: Feb 3^rd, 2012	Re: Martini Reply #10 - Apr 22^nd, 2019 at 4:40pm	Print Post
	They are fun!


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.0029 seconds.