ASSRA Forum › General › Rifle Photos › Maynard 1873 Model #10 .40-70 Maynard 32"
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) Maynard 1873 Model #10 .40-70 Maynard 32" (Read 3503 times)
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Maynard 1873 Model #10 .40-70 Maynard 32"
Feb 8th, 2019 at 10:15pm
Print Post  
Well, the two newest additions to my growing Maynard addiction arrived in today's mail.  First is an 1873 Model #10 in .40-70 Maynard thick rim with a 32" barrel.  It has a 9" octagon breech section with the rest of the barrel round.  Serial number is 7019 and the barrel number appears to be force matched to the receiver.  (Looks to be ground and then the number applied.)  It has a Maynard tang sight plus the open rear sight and a globe front with a very fine "pinball" front sight.  (Unfortunately it appears the that front sight globe was crushed and mangled during transit so it'll have to be tuned up a bit.)  The bore is very good, but a bit hazy in the throat area, but it could just be some leading.  I'll have to give a good scrubbing with several applications of Hoppes #9 bore solvent and see if it improves a bit.

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
GT
Frequent Elocutionist
*****
Offline



Posts: 2042
Location: Northeast Wyoming
Joined: Jun 28th, 2015
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #1 - Feb 8th, 2019 at 11:00pm
Print Post  
Al,
Nice acquisition! it's sad to see the sight damaged like that, there's a slim chance the ring could be brought back round and re-shaped to fit.  I'll be curious to see how she shoots.
Greg
  
"To invent, you need a good imagination and a pile of junk"  T. A. Edison
"The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #2 - Feb 8th, 2019 at 11:49pm
Print Post  
GT wrote on Feb 8th, 2019 at 11:00pm:
Al,
Nice acquisition! it's sad to see the sight damaged like that, there's a slim chance the ring could be brought back round and re-shaped to fit.  I'll be curious to see how she shoots.
Greg


Yes, I have a pretty good gunsmith that might be able to rework that damaged sight back to round again.  I sure hope so.  I already have two other 1873's in .40-60 thick rim so it'll be interesting to shoot this .40-70 thick rim and compare some targets.

Cool
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
Joe Do...
Oldtimer
ASSRA Board Member
ASSRA Journal Editor
*****
Offline



Posts: 586
Location: 'burbs of Chicago
Joined: May 19th, 2012
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #3 - Feb 9th, 2019 at 9:20am
Print Post  
Both Maynard rifles you posted photos of are very, very nice.  I own only one but could see how easy it would be to add several more.  Many competitive shooters and trick shots used Maynard rifles.  I think they are under-appreciated and under-valued. 

Thanks for sharing with us!
  
Back to top
 
IP Logged
 
Deadeye Bly
Frequent Elocutionist
*****
Offline



Posts: 1057
Location: Stephens City
Joined: Feb 25th, 2011
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #4 - Feb 9th, 2019 at 9:29am
Print Post  
Nice rifle there, good acquisition. Can't wait to hear how it shoots.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16111
Location: Oregon
Joined: Feb 2nd, 2009
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #5 - Feb 9th, 2019 at 10:22am
Print Post  
That is another great looking rifle Al! Hope your gunsmith can apply enough heat to get the combination sight round again!
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #6 - Feb 9th, 2019 at 1:29pm
Print Post  
marlinguy wrote on Feb 9th, 2019 at 10:22am:
That is another great looking rifle Al! Hope your gunsmith can apply enough heat to get the combination sight round again!


I'm cautiously optimistic that he can fix it ... I'll let him have a go at it and we'll see what happens.

By the way Val have you ever seen a long base buckhorn sight like this one before?  Can't say that I've ever seen anything quite like it.
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #7 - Feb 9th, 2019 at 1:36pm
Print Post  
Joe Do... wrote on Feb 9th, 2019 at 9:20am:
I own only one but could see how easy it would be to add several more.  Many competitive shooters and trick shots used Maynard rifles.  I think they are under-appreciated and under-valued. 

Thanks for sharing with us!


No problem, I always enjoy posting photos of new finds as someone usually chimes in with information I didn't have on them.

I agree with you that Maynards are under-appreciated (but I hope they stay under-valued so that I can buy more of them before the prices take off!).  Early last year I didn't own a Maynard yet and then after I bought the very first one it was definitely the "slippery slope".  I now have 6 Maynards and of course I would buy more in a heartbeat!  All of the Maynards I have so far are cartridge guns so I guess I really need to watch for an 1865 percussion rifle or carbine now ...

Smiley
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16111
Location: Oregon
Joined: Feb 2nd, 2009
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #8 - Feb 9th, 2019 at 2:25pm
Print Post  
Can't say that I've ever seen buckhorn sight quite like that Al? It's tough to judge length, but appears to be 4.5" long or so? Most long buckhorns I've seen are around 3.5"-4" long, and usually have a point on the front edge.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #9 - Feb 9th, 2019 at 2:52pm
Print Post  
I just measured that buckhorn rear sight and it is 4 1/2" overall from the front edge back to the buckhorn.  Longest open rear sight I've ever had on any of my rifles.  You've just got to love the little mysteries related to these old rifles.

That reminds me too ... I still have to pull the buttplates off all of these Maynards and have a look underneath them.  Sometimes I've found little "snippets" of a gun's history under their buttplates.  Old receipts or old hunting licences or notes with previous owners names listed in case the gun was ever stolen and the owner needed to prove ownership to recover it, etc.  Not often do I find such things, but over the years there have been one or two ...

Cool
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16111
Location: Oregon
Joined: Feb 2nd, 2009
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #10 - Feb 9th, 2019 at 4:12pm
Print Post  
Hope springs eternal! I always look too, and on 2 or 3 occasions it proved very interesting.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #11 - Feb 9th, 2019 at 4:14pm
Print Post  
But I never find any gold coins ...

Cry
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16111
Location: Oregon
Joined: Feb 2nd, 2009
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #12 - Feb 9th, 2019 at 9:05pm
Print Post  
Sometimes what you might find is worth more than gold coins!
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
powderman
Senior Forum Member
****
Offline



Posts: 334
Location: British Columbia
Joined: Feb 26th, 2005
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #13 - Feb 10th, 2019 at 11:23pm
Print Post  
I had a Long Range No.1 Rolling Block. When I removed the buttplate, written in ink was:   L Hepburn
                   Colton, NY and a date in the 1870s which I don't remember.

Never found anything else of interest.


Regards,
Powderman
  
Back to top
 
IP Logged
 
Reverend Al
Oldtimer
*****
Offline



Posts: 568
Location: Victoria BC Canada
Joined: Jun 25th, 2016
Re: Maynard 1873 Model #10 .40-70 Maynard 32"
Reply #14 - Feb 11th, 2019 at 3:44am
Print Post  
Just curious Powderman what part of BC are you in?  Nice to see another Canuck on here ...

Cool
  
I may have passed my "Best Before" date, but I haven't quite reached my "Expiry" date yet ...
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2905 seconds.