ASSRA Forum - Forming 44/90 Peabody "What Cheer"

ASSRA Forum › General › Reloading the Single Shot Rifle › Forming 44/90 Peabody "What Cheer"

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Forming 44/90 Peabody "What Cheer" (Read 1455 times)

JWDreamstone Participating Member Offline Posts: 37 Location: Long Branch, New Jersey Joined: Oct 11^th, 2017	Forming 44/90 Peabody "What Cheer" Dec 11^th, 2018 at 9:20pm	Print Post
	Anyone have any experience on making This. I purchased a case from Buffalo arms . He is forming this on a Jamison 43 spanish. from the spec it does not seem right. . Looking @ the book spec the 50/90 Sharps is the best choice Or 32 gage Magtech Brass. any comment JW


	IP Logged

Mike Gish Full Member Offline Posts: 183 Location: colorado Joined: Jul 6^th, 2006	Re: Forming 44/90 Peabody "What Cheer" Reply #1 - Dec 11^th, 2018 at 10:47pm	Print Post
	You might talk to these guys, there is a one page blip in the latest Black Powder Cartridge News, (You need to *Login* or *Register* to view media files and links)


	Skype/VoIP IP Logged

ten-mile Full Member Offline Posts: 165 Location: Chetek Joined: Dec 8^th, 2007	Re: Forming 44/90 Peabody "What Cheer" Reply #2 - Dec 12^th, 2018 at 8:30am	Print Post
	I have a Peabody Creedmoor model in 44-100 and I think the case is the same. I plan to start with 460 Weatherby cases. Once the case is formed and trimmed, I will turn the head to fit a rim piece and silver solder it on. My solder is in paste form and works at 430F. I will use an induction annealer to do the heating so the temp of the brass won't exceed 500F. I have all the parts in place but lots of projects in front of this one. After all that, the RCC brass would be in your hands within a couple of weeks at a price that looks steep but is really pretty reasonable.


	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9389 seconds.