ASSRA Forum - Harrell’s Small Pistol/Schuetzen measure

ASSRA Forum › General › Reloading the Single Shot Rifle › Harrell’s Small Pistol/Schuetzen measure

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1 [2]

Very Hot Topic (More than 25 Replies)

Harrell’s Small Pistol/Schuetzen measure (Read 8102 times)

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 18060 Location: Oregon Joined: Feb 2^nd, 2009	Re: Harrell’s Small Pistol/Schuetzen measure Reply #15 - Dec 3^rd, 2018 at 1:28pm	Print Post
	The schuetzen measure I have can be changed to allow differences in charge drop per click. Pretty sure most Harrell's have this feature? You simply turn in the correct setscrews on the end of the charge adjustment to change the rate per click.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 18060 Location: Oregon Joined: Feb 2^nd, 2009	Re: Harrell’s Small Pistol/Schuetzen measure Reply #16 - Dec 3^rd, 2018 at 1:46pm	Print Post
	boats wrote on Dec 2^nd, 2018 at 3:06pm: Any kind of plastic container go to these guys. Instant shipping at reasonable cost no order too small. They have bottles to fit Harrell’s I just ordered some Delrin balls in several sizes. Use them under the set screw on loading die lock rings keeps from deforming the threads . Some larger to go under the lock screws on lathe and mill finals. (You need to *Login* or *Register* to view media files and links) Boats Only issue is their bottles don't have the plug in the bottom like a Harrell's does. So if you want to dump a charge back in you have to remove the bottle.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

rkba2nd Frequent Elocutionist Offline Posts: 2103 Location: earth Joined: Feb 16^th, 2009	Re: Harrell’s Small Pistol/Schuetzen measure Reply #17 - Dec 3^rd, 2018 at 1:54pm	Print Post
	Easy to drill a hole and insert plugs available at most hardware stores, or just drill hole if not storing powder. Use a hole saw of the chosen size.

	rkba2nd
	IP Logged

boats Frequent Elocutionist Offline Posts: 7731 Location: Virginia Joined: Apr 23^rd, 2004	Re: Harrell’s Small Pistol/Schuetzen measure Reply #18 - Dec 3^rd, 2018 at 3:13pm	Print Post
	Give them a call online not a full listing Boats


	IP Logged

Skalkaho Oldtimer Offline Posts: 864 Location: Montana Joined: Sep 29^th, 2006	Re: Harrell’s Small Pistol/Schuetzen measure Reply #19 - Dec 3^rd, 2018 at 7:13pm	Print Post
	Have the Schuetzen and the 0-60 grain. Cant beat them,I ordered six extra bottles( 8 oz?) All my powders labeled and ready to go when needed. Going on twelve years +.

	May the Bullet Gods be with you.......
	IP Logged

bpjack Frequent Elocutionist Online Posts: 3791 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Harrell’s Small Pistol/Schuetzen measure Reply #20 - Dec 3^rd, 2018 at 10:16pm	Print Post
	Vall, I was told that those 3 screws do indeed change the clicks per turn. I think I heard it from Mark (marcusp323) at our local range. Does anyone have any instructions on how to adjust them? Jack

	People who think they know everything are a great annoyance to those of us who do.
	IP Logged

jfeldman ASSRA Board Member Offline Posts: 1120 Location: Imperial Beach, Ca Joined: Nov 5^th, 2005	Re: Harrell’s Small Pistol/Schuetzen measure Reply #21 - Dec 3^rd, 2018 at 10:29pm	Print Post
	Got to tell you guys, I learned about the two different sizes of Harrells measures from bpjack, who talked me out of buying the larger one - that he had for sale! Thanks Jack! Is this a great fraternity or what? Regards, Joe


	IP Logged

craigd Frequent Elocutionist Offline Posts: 2058 Location: midwest Joined: Feb 22^nd, 2009	Re: Harrell’s Small Pistol/Schuetzen measure Reply #22 - Dec 3^rd, 2018 at 10:29pm	Print Post
	boats wrote on Dec 3^rd, 2018 at 4:55am: ....My larger Harrell’s is no longer in production . It was his economy model exact name I can’t recall. Bought from ?Lynwood Harrell in his shop about 1998-1999 . Basically the same design no bearings. You can feel the lack of bearings, it still throws well. Boats The Schuetzen measure also doesn't have bearings. Someone else mentioned it in a previous thread, and I pulled mine apart just to just check. The bearing models are nice, but I don't think one could go wrong with their products. Thanks for commenting on your light load test.


	IP Logged

bpjack Frequent Elocutionist Online Posts: 3791 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Harrell’s Small Pistol/Schuetzen measure Reply #23 - Dec 3^rd, 2018 at 11:04pm	Print Post
	Shhhh Joe, Patty bought that one I had at Spokane for Westerner. Actually it was just as accurate just not as fine clicks. Maybe it could be adjusted to give what my smaller one gets. Even though mine can throw .025gr per click, with 300MP I usually adjust in 10th gr increments. Jack

	People who think they know everything are a great annoyance to those of us who do.
	IP Logged

Jeff_Schultz ASSRA Board Member Offline Posts: 1661 Location: Ransomville, NY Joined: Apr 25^th, 2004	Re: Harrell’s Small Pistol/Schuetzen measure Reply #24 - Dec 4^th, 2018 at 7:46am	Print Post
	bpjack wrote on Dec 3^rd, 2018 at 10:16pm: Vall, I was told that those 3 screws do indeed change the clicks per turn. I think I heard it from Mark (marcusp323) at our local range. Does anyone have any instructions on how to adjust them? Jack Some have 3 screws, some 2, and some only one. I have no idea what they do or how they work, but I'd like to!

	"We have met the enemy and he is us." Pogo “There is no situation so bad that it cannot be made worse." Confidence- The feeling you get before you fully understand the situation.
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 18060 Location: Oregon Joined: Feb 2^nd, 2009	Re: Harrell’s Small Pistol/Schuetzen measure Reply #25 - Dec 4^th, 2018 at 11:52am	Print Post
	I got the info from Harrell's, but don't recall how they work today. I know that turning each screw of the three changes the charge rate per click, and that you can leave them all fully out, or any of the three fully turned in. I also recall that all of them turned in gives the smallest rate per click. I'd have to contact Harrell's again, as I don't find the information at their web site now. I often wonder why they have this feature and don't mention it clearly in their manuals or at their site? Here's what the instructions say: 6 clicks between numbers, .1 grain per click adjustment, easily converts to 4 clicks

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

oughtsix Global Moderator ASSRA Board Member Offline Posts: 1362 Location: Columbus Joined: May 31^st, 2009	Re: Harrell’s Small Pistol/Schuetzen measure Reply #26 - Dec 5^th, 2018 at 11:55pm	Print Post
	I do know you don't want to work on one while sitting at the range, in the grass. You'll never find the tiny bits. I know a guy that did that.

	Life Member ASSRA, OGCA & TSGC I'm all in favor of keeping dangerous weapons out the hands of fools. Let's start with typewriters........ Frank Lloyd Wright
	IP Logged

Gard72977 Full Member Offline Posts: 201 Location: Tupelo MS Joined: Dec 18^th, 2016	Re: Harrell’s Small Pistol/Schuetzen measure Reply #27 - Dec 6^th, 2018 at 8:54am	Print Post
	I bought a Harrell benchrest measure years ago. I remember it being really accurate. Got it out a month ago and it didn't throw very well. Its been many years since I used it. I guess I have just forgotten how to use it. Glad I read this thread. I need to get it back out and play with it. I have become dependent on the RCBS digital dispenser.


	IP Logged

Page Index Toggle

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.5305 seconds.