ASSRA Forum - murata meiji 18

ASSRA Forum › General › Reloading the Single Shot Rifle › murata meiji 18

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

murata meiji 18 (Read 1803 times)

jarmann Participating Member Offline Posts: 38 Joined: Apr 7^th, 2014	murata meiji 18 Oct 16^th, 2018 at 9:09am	Print Post
	some one reloading for this rifle please advice jarmann


	IP Logged

JWDreamstone Participating Member Offline Posts: 37 Location: Long Branch, New Jersey Joined: Oct 11^th, 2017	Re: murata meiji 18 Reply #1 - Oct 16^th, 2018 at 7:44pm	Print Post
	I make shootable brass and load for it.Are you looking For a load Or Brass info


	IP Logged

jarmann Participating Member Offline Posts: 38 Joined: Apr 7^th, 2014	Re: murata meiji 18 Reply #2 - Oct 19^th, 2018 at 8:49am	Print Post
	I tested cases of the werndl they seat very well in the chamber also ex .348 made for werndl what bullet can I use .439 or .446 ? greetings from Jarmann


	IP Logged

jarmann Participating Member Offline Posts: 38 Joined: Apr 7^th, 2014	Re: murata meiji 18 Reply #3 - Oct 22^nd, 2018 at 6:07am	Print Post
	yes Joe, single shot model 1885 meiji 18 action like a dutch beaumont , bullet dia close to .446 lets say .442,original bullet weight was 416 gn and paperpatched did'nt shoot it yet , case made from.348 win works but is 7mm to short ,rim is to small ,case doesnt extract correct , werndl case is much better but has to be fireformed of course greetings from jarmann


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.5255 seconds.