ASSRA Forum › General › General Discussion › Front sight
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Front sight (Read 1417 times)
silver
Full Member
***
Offline



Posts: 245
Location: Central wi,
Joined: Sep 20th, 2016
Front sight
Sep 20th, 2018 at 9:41am
Print Post  
Being fairly new at this, wondering if this is an original Winchester 
Front sight or who made it . Would like insert with apture instead of a wide post that is in there ,but it is probably as rare as hens teeth. Maybe new sight in future. Any thoughts?

Thanks doug
  
Back to top
 
IP Logged
 
rodneys
Oldtimer
*****
Offline



Posts: 709
Location: Central Oklahoma
Joined: Mar 2nd, 2015
Re: Front sight
Reply #1 - Sep 20th, 2018 at 10:02am
Print Post  
It is hard to identify from the picture, but the wide post sounds like a parts unknown aka red river sight if so , pm your address and I will send you an aperture. See if it fits. Rodney
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18048
Location: Oregon
Joined: Feb 2nd, 2009
Re: Front sight
Reply #2 - Sep 20th, 2018 at 10:25am
Print Post  
Looks like a Winchester or Stevens repop, but MVA sells sight cards for them if you want a variety. It's the 3rd card on the right.

(You need to Login or Register to view media files and links)
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
silver
Full Member
***
Offline



Posts: 245
Location: Central wi,
Joined: Sep 20th, 2016
Re: Front sight
Reply #3 - Sep 20th, 2018 at 11:22am
Print Post  
Thanks marlinguy that is the one. Will place order

Doug
  
Back to top
 
IP Logged
 
Ranch13
Oldtimer
*****
Online



Posts: 636
Location: East Central Wy.
Joined: Jan 20th, 2018
Re: Front sight
Reply #4 - Sep 20th, 2018 at 2:45pm
Print Post  
Measure the thickness of that insert, MVA's inserts are a bit thinner than the copy's of that sight from Pedersoli/Uberti etc.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18048
Location: Oregon
Joined: Feb 2nd, 2009
Re: Front sight
Reply #5 - Sep 20th, 2018 at 5:36pm
Print Post  
I think his sight is a Parts Unknown copy of a Winchester. But MVA inserts are .012" thick, so you can put a feeler gauge into your sight slot to see how thick your slot is now. A little play of .002" or less wont be an issue. The clip holds them very well.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1971 seconds.