ASSRA Forum › General › Collecting Single Shot Rifles › Remington Beals
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Remington Beals (Read 2525 times)
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Remington Beals
Aug 26th, 2018 at 6:09pm
Print Post  
saw this on Gb today:
(You need to Login or Register to view media files and links)

I never seen any discussion on a Beals, does anyone have/shoot one?
are 38RF adapters around?
Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
Bill Lawrence
Frequent Elocutionist
*****
Offline



Posts: 1037
Joined: Mar 17th, 2014
Re: Remington Beals
Reply #1 - Aug 26th, 2018 at 7:27pm
Print Post  
Yes they are.  Dixie Gun Works (and likely others) carries them.  Dixie's catalog number is KA1203.   They also carry the .22 blanks that act as the primers.

Bill Lawrence
« Last Edit: Aug 26th, 2018 at 7:45pm by Bill Lawrence »  
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3585
Joined: Mar 9th, 2015
Re: Remington Beals
Reply #2 - Aug 26th, 2018 at 9:09pm
Print Post  
This particular example is in .32 rf, not the bigger one, in case adapters are only available for the biggie.
  
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: Remington Beals
Reply #3 - Aug 26th, 2018 at 9:45pm
Print Post  
yep, the 38 on the lever threw me.
Thanks
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: Remington Beals
Reply #4 - Aug 27th, 2018 at 10:33am
Print Post  
calledflyer wrote on Aug 26th, 2018 at 9:09pm:
This particular example is in .32 rf, not the bigger one, in case adapters are only available for the biggie.


No, Dixie sells them for the .32RF also.

(You need to Login or Register to view media files and links)
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3585
Joined: Mar 9th, 2015
Re: Remington Beals
Reply #5 - Aug 27th, 2018 at 11:40am
Print Post  
Well, there we go, then. Thankx fer the information, Vall. 
I think you're deserving here Smiley of a belated attaboy.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: Remington Beals
Reply #6 - Aug 27th, 2018 at 11:48am
Print Post  
calledflyer wrote on Aug 27th, 2018 at 11:40am:
Well, there we go, then. Thankx fer the information, Vall. 
I think you're deserving here Smiley of a belated attaboy.


Thanks Pat! They are aluminum cases vs. the larger being brass that I've purchased from Dixie. But I've not liked any of these adapter cases using .22 blanks, as punching out the blanks once they're fired is a PITA. The mouth of the spent case opens up inside the adapter, and locks itself into the adapter. I found trying to put the case over a hole to punch it out was frustrating. I had a friend make me a base with a recess cut in it to drop the base of the adapter into. The recess had a hole I could line up the .22 blank in, so it held the case and let the .22 blank case drop out when punched. 
But it was still a PITA and not worth the effort to use them. I'd rather not shoot them, or modify the gun to CF if it's not collector quality.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
bisaacson
Full Member
***
Offline



Posts: 170
Location: Kailua
Joined: Sep 1st, 2009
Re: Remington Beals
Reply #7 - Aug 27th, 2018 at 9:58pm
Print Post  
I shoot a variety of SS rifles with cases primed with .22 cases with the bullets pulled and have had little or no trouble pushing out the spent .22 case. Since the pressure inside the .22 case is the same as that outside, it doesn't expand except in the area where it goes through the back of the adapted case, and that usually doesn't offer much resistance at BP pressures, which is all I use in old RF guns.
  
Back to top
 
IP Logged
 
rgchristensen
Frequent Elocutionist
*****
Offline



Posts: 1103
Joined: Jan 2nd, 2014
Re: Remington Beals
Reply #8 - Aug 28th, 2018 at 10:02am
Print Post  
    22 priming -- I have always used cut-off 22LR cases.   Grab them in a collet and use a pointy tool to part them off.   Tried some nail-gun blanks, but they expand on the inside and get locked in.   With most smokeless powders, I find it necessary to put in 1/3 gr or so of FFFFg as a priming charge.

CHRIS
RGChristensen
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.3473 seconds.