ASSRA Forum › General › Reloading the Single Shot Rifle › Re: Greasing the barrel
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Re: Greasing the barrel (Read 5445 times)
Schuetzenmiester
Frequent Elocutionist
*****
Offline



Posts: 6707
Location: Cool Wet Side of WA
Joined: Apr 27th, 2008
Re: Greasing the barrel
Reply #15 - Aug 14th, 2018 at 4:44pm
Print Post  
I don't know why one of the mold makers does not make a Self Greaser .  It would save a lot of time pan lubing, ect. A vent line from the base to each quadrant of the grease  grooves should do it.  A lube cookie in the mouth of the case should do it  Roll Eyes
  
"some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3963
Joined: Mar 9th, 2015
Re: Greasing the barrel
Reply #16 - Aug 14th, 2018 at 5:24pm
Print Post  
I think JS has a plan for the guys that don't own a file for making the dovetail. Drilling is dangerous. I keep drilling through both sides of the barrel and need to install two zerks. Overkill.
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4465
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Greasing the barrel
Reply #17 - Aug 15th, 2018 at 12:41am
Print Post  
I don't know about greasing the barrels but in Germany wasn't beer used to grease the shooters? And, Joe, you look so powerful and handsome with that grease gun;-)
  
Back to top
 
IP Logged
 
coljimmy
Senior Forum Member
****
Offline



Posts: 283
Joined: Nov 10th, 2012
Re: Greasing the barrel
Reply #18 - Aug 15th, 2018 at 12:49am
Print Post  
To add more realism to this learned discourse, Smith & Wesson did introduce a cartridge around 1900 where the hollow base bullet was filled with grease with a lead plug which when fired forced grease out of vented holes in the nose of the bullet.  Alfred Nobel decided to give his prize to someone else.

James
  
Back to top
 
IP Logged
 
coljimmy
Senior Forum Member
****
Offline



Posts: 283
Joined: Nov 10th, 2012
Re: Greasing the barrel
Reply #19 - Aug 15th, 2018 at 12:50am
Print Post  
To add more realism to this learned discourse, Smith & Wesson did introduce a cartridge around 1900 where the hollow base bullet was filled with grease with a lead plug which when fired forced grease out of vented holes in the nose of the bullet.  Alfred Nobel decided to give his prize to someone else.

James
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1844 seconds.