ASSRA Forum - Lyman STS parts supply

ASSRA Forum › General › General Discussion › Lyman STS parts supply

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Very Hot Topic (More than 25 Replies)

Lyman STS parts supply (Read 5110 times)

Mick B Frequent Elocutionist Offline Posts: 1004 Location: 19 Ian Nicol St watson ACT aus Joined: Apr 11^th, 2013	Lyman STS parts supply Jul 4^th, 2018 at 8:56am	Print Post
	I need a new screw that goes through the front mount of my STS scope, somehow the original has got bent and won't turn smoothly. Finding something here that does not have a Phillips head and is blued, is nigh on impossible. Mike.


	IP Logged

tdmidget Junior Member Offline Posts: 52 Joined: Jan 21^st, 2016	Re: Lyman STS parts supply Reply #1 - Jul 4^th, 2018 at 9:03am	Print Post
	Where is "here"? Put your location in.


	IP Logged

tdmidget Junior Member Offline Posts: 52 Joined: Jan 21^st, 2016	Re: Lyman STS parts supply Reply #2 - Jul 4^th, 2018 at 9:04am	Print Post
	Where is "here"? Put your location in.


	IP Logged

boats Frequent Elocutionist Offline Posts: 7547 Location: Virginia Joined: Apr 23^rd, 2004	Re: Lyman STS parts supply Reply #3 - Jul 4^th, 2018 at 11:50am	Print Post
	Micks in Australia Boats


	IP Logged

OLD TUCK Senior Forum Member Offline Posts: 469 Location: Middleborough MA Joined: Oct 5^th, 2017	Re: Lyman STS parts supply Reply #4 - Jul 4^th, 2018 at 3:37pm	Print Post
	The real issue will be getting the old one out. I once agreed to try. Was successful but it took a lot of work to figure out WHERE? the Screw was, and how to make a setup that would put me right on it. Then drilled a series of holes from way under size thru the screw and opening it up with a left hand twist drill when it got near minor diameter. And then it just grabbed and screwed itself right out of the Aluminum. Also I got a replacement from the guy in Texas I think that just went in nice. The best advice you can give to a new shooter is 'DO NOT USE A SCREW DRIVER ON THESE, THEY ARE DAMAGED EASILY" Use either a Penny or a Quarter finger tight. FITZ. OLD TUCK. P.S. My memory seems to be telling me these were a fine thread, either forty or forty eight pitch cannot remember right now but Taps were available. FITZ.


	IP Logged

Mick B Frequent Elocutionist Offline Posts: 1004 Location: 19 Ian Nicol St watson ACT aus Joined: Apr 11^th, 2013	Re: Lyman STS parts supply Reply #5 - Jul 4^th, 2018 at 8:15pm	Print Post
	Sorry if I have caused some confusion but the screw I need is the one that passes through the serrated thumb wheel in the front mount. I don't know what that wheel is called as I don't have a parts list. Mike. PS Where might one obtain a parts list in case I encounter more problems at a later date ?.


	IP Logged

Mick B Frequent Elocutionist Offline Posts: 1004 Location: 19 Ian Nicol St watson ACT aus Joined: Apr 11^th, 2013	Re: Lyman STS parts supply Reply #6 - Jul 5^th, 2018 at 7:41am	Print Post
	Can anyone with a parts diagram or part number help, are there any parts suppliers in your neck of the woods, there's none here. Mike.


	IP Logged

.22Hepburn Oldtimer Offline Posts: 803 Location: Pennsylvania Joined: Feb 18^th, 2008	Re: Lyman STS parts supply Reply #7 - Jul 5^th, 2018 at 7:45am	Print Post
	"Can anyone with a parts diagram or part number help, are there any parts suppliers in your neck of the woods" You might have better luck finding a unicorn.


	Facebook IP Logged

Kurt_701 Frequent Elocutionist Online Posts: 1015 Location: Missouri Joined: May 20^th, 2004	Re: Lyman STS parts supply Reply #8 - Jul 5^th, 2018 at 8:15am	Print Post
	This is Unertl's dehorned mount but the screw should be the similar. I believe you are looking for item 16. Hope it helps. (You need to *Login* or *Register* to view media files and links)

	M-14 3rd Battalion 27th Marines RVN 68'69'
	IP Logged

Kurt_701 Frequent Elocutionist Online Posts: 1015 Location: Missouri Joined: May 20^th, 2004	Re: Lyman STS parts supply Reply #9 - Jul 5^th, 2018 at 8:27am	Print Post
	Here is a patent on these type mounts which shows a pin retaining the screw. (You need to *Login* or *Register* to view media files and links)

	M-14 3rd Battalion 27th Marines RVN 68'69'
	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1752 Location: Central Wi Joined: Dec 20^th, 2007	Re: Lyman STS parts supply Reply #10 - Jul 5^th, 2018 at 12:32pm	Print Post
	Mick B The place to get a replacement clamp screw for your STS is Parson's Scope Service. He has helped me on a number of STS scope repairs beltfed/arnie


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1752 Location: Central Wi Joined: Dec 20^th, 2007	Re: Lyman STS parts supply Reply #11 - Jul 5^th, 2018 at 12:33pm	Print Post
	MIck Parson's had picked up all the spare parts for the old Lyman scopes years ago from the Lyman factory. beltfed/arnie


	IP Logged

Mick B Frequent Elocutionist Offline Posts: 1004 Location: 19 Ian Nicol St watson ACT aus Joined: Apr 11^th, 2013	Re: Lyman STS parts supply Reply #12 - Jul 5^th, 2018 at 7:44pm	Print Post
	Kurt Thanks for the drawings, now I have an idea of the part number although I'm still a little confused, the first drawing shows the screw as part # 16 and the wheel it passes through as part # 15. The second drawing shows what appears to be the same bits, but this time the screw part number 8 and the wheel is part # 9. Anyway I will now contact Parsons and see if they have one in stock, it may pay to get a couple so I have a spare. Thanks to both you and Arnie for all your help. Mike.


	IP Logged

Kurt_701 Frequent Elocutionist Online Posts: 1015 Location: Missouri Joined: May 20^th, 2004	Re: Lyman STS parts supply Reply #13 - Jul 5^th, 2018 at 9:00pm	Print Post
	The first drawling is of a Unertl dehorned mount. I could not find the patent for Unertl Target mount. The second drawling is from someone else patent. I think it is the same as Fecker. D.A. Baker worked for Fecker.

	M-14 3rd Battalion 27th Marines RVN 68'69'
	IP Logged

Mick B Frequent Elocutionist Offline Posts: 1004 Location: 19 Ian Nicol St watson ACT aus Joined: Apr 11^th, 2013	Re: Lyman STS parts supply Reply #14 - Jul 6^th, 2018 at 1:37am	Print Post
	Kurt I have sent an enquiry to Parsons giving them the part numbers from the drawings you posted, I didn't notice they were Unertl scopes, hope they can sort my problem and I have not confused them with the part numbers. Mike.


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.3341 seconds.