ASSRA Forum › General › Reloading the Single Shot Rifle › 25-20SS brass
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 25-20SS brass (Read 1653 times)
Geezer
Participating Member
*
Offline



Posts: 35
Joined: Jan 5th, 2018
25-20SS brass
May 10th, 2018 at 7:03pm
Print Post  
I'm getting started with loading the 25-20 SS and just got some Jamieson (forgot the new company). Looks like pretty good brass, but there's no uniformity in length. What is the trim-to length for this brass please. Thanks for any replies.
  
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3970
Joined: Mar 9th, 2015
Re: 25-20SS brass
Reply #1 - May 10th, 2018 at 7:27pm
Print Post  
check your PM, I sent a case diagram. Ought to get you all the sizes you need for those cases. Good luck.
  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: 25-20SS brass
Reply #2 - May 11th, 2018 at 4:41pm
Print Post  
Geezer - See correction, next post Cartridges Conversions say the cartridge length is 1.31" and there are no Parent cases to reform to 25-20SS
« Last Edit: May 12th, 2018 at 3:14pm by »  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: 25-20SS brass
Reply #3 - May 12th, 2018 at 2:18pm
Print Post  
CORRECTION ... I checked the Cartridge Conversions BOOK and the 25-20SS case length is 1.630 .... not the 1.31 length listed in the tables

Geezer - sent you PM for back up for this correction post
Geezer got my PM with the correct length and I changed the length in the tables too  Smiley
« Last Edit: May 12th, 2018 at 3:16pm by »  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8346 seconds.