ASSRA Forum › General › Reloading the Single Shot Rifle › 32-20 loads for 30" bbl
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) 32-20 loads for 30" bbl (Read 6112 times)
John Boy
Ex Member


Re: 32-20 loads for 30" bbl
Reply #15 - May 12th, 2018 at 2:01pm
Print Post  
Quote:
Im using Accurate mold 313105c.

Gard, there is no Accurate bullet mold number 313105c.  Is this the 0.314 base diameter bullet you're using?
(You need to Login or Register to view media files and links)

The Uberti 32-20 spec's are:
CAL. .32-20      20"(508)      RH      .305(7.75) lands      .311(7.09) groove      6 lands

If you are using the 31-105C bullet with 2 grease grooves and a 0.314 base diameter ... you have absolutely no concern using with a good lube your reloaded NAKED BASE bullets with either smokeless or black powder charges!
So stop fretting and worrying - Your Good to Go
« Last Edit: May 12th, 2018 at 2:06pm by »  
Back to top
 
IP Logged
 
Gard72977
Full Member
***
Offline



Posts: 201
Location: Tupelo MS
Joined: Dec 18th, 2016
Re: 32-20 loads for 30" bbl
Reply #16 - May 12th, 2018 at 2:15pm
Print Post  
This is the numbers on the mold. i bought it about 4 years ago. They are barely being sized in a .313 sizer with the alloy im using. The are dropping just shy of .314
  
Back to top
 
IP Logged
 
Gard72977
Full Member
***
Offline



Posts: 201
Location: Tupelo MS
Joined: Dec 18th, 2016
Re: 32-20 loads for 30" bbl
Reply #17 - May 12th, 2018 at 3:19pm
Print Post  
Quote:
Quote:
Im using Accurate mold 313105c.

Gard, there is no Accurate bullet mold number 313105c.  Is this the 0.314 base diameter bullet you're using?
(You need to Login or Register to view media files and links)

The Uberti 32-20 spec's are:
CAL. .32-20      20"(508)      RH      .305(7.75) lands      .311(7.09) groove      6 lands

If you are using the 31-105C bullet with 2 grease grooves and a 0.314 base diameter ... you have absolutely no concern using with a good lube your reloaded NAKED BASE bullets with either smokeless or black powder charges!
So stop fretting and worrying - Your Good to Go


That is the bullet. Im guessing he marks them with the correct bullet diameter. This is a single grease grove with a crimp grove. Im going to lube both.

I wanted to try a little heavier bullet and also GC's. I dont have much experience with PB bullets in rifles. The new mold will give me a chance to try the same bullet with and without GC.

With the right powder im hoping a 1500fps GC bullet performs well. I would love to pop some 200yd ( actually 214yd) steel with this little round.
  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: 32-20 loads for 30" bbl
Reply #18 - May 12th, 2018 at 6:29pm
Print Post  
Gard, if you can't pop the 200 yd steels with your reloads - ain't the reloads friend - it's the trigger man Grin
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1462 seconds.