ASSRA Forum › General › Reloading the Single Shot Rifle › Ever hear of an Ideal 379300 Mold?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Ever hear of an Ideal 379300 Mold? (Read 1514 times)
John Boy
Ex Member


Ever hear of an Ideal 379300 Mold?
Nov 11th, 2017 at 11:41am
Print Post  
I have not but there is an Ideal 375300 mold which Pedufa sent several of us samples 
(You need to Login or Register to view media files and links)
(You need to Login or Register to view media files and links)
Anyway, I bought it off eBay believing that the base band on the 375300 is 378 and previous owner marked it 379.  But why there is no Ideal stamping on the mold is a mystery
  
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7659
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: Ever hear of an Ideal 379300 Mold?
Reply #1 - Nov 11th, 2017 at 12:32pm
Print Post  
JB,
They might be Ideal/Lyman modified blocks but, what makes you think it's a Ideal mold?

The mold uses SHCS (Allen heads), larger dowels and the retaining screws, for the handles are in the top of the mold. None of those are Lyman/Ideal features.

Frank
  
ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
Tom_Trevor assra life no.71
Oldtimer
*****
Offline


Tom Trevor

Posts: 712
Location: Granada Hills Ca.
Joined: Jun 16th, 2004
Re: Ever hear of an Ideal 379300 Mold?
Reply #2 - Nov 11th, 2017 at 12:44pm
Print Post  
John Boy, I do not think the mold is an Ideal look at the handle mounting screws entering under the cut off and the cutoff stop is a allen socket head.
If you have Darr mold look at it and they are the same set up.
here is a shot of Darr 322190E. Hard to see the marking on the side of mine but they are lightly electro-penciled just like the one shown.
Just found a copy of the Darr catalogue I have from the 70s. 379300 is listed in it. Looks like Frank and I posted the same thoughts.
« Last Edit: Nov 11th, 2017 at 1:14pm by Tom_Trevor assra life no.71 »  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: Ever hear of an Ideal 379300 Mold?
Reply #3 - Nov 11th, 2017 at 4:32pm
Print Post  
Gentlemen - thanks fot the block identification not being an Ideal.  I didn't go that far into the mold specifics.  Stopped at the 379300 mold number even though it was not stamped with any of the normal Ideal lettering.  Thought the scribed 379300 was strange so that it was a Ideal blank mold
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1717 seconds.