ASSRA Forum - Mold question

ASSRA Forum › General › Reloading the Single Shot Rifle › Mold question

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

Mold question (Read 2986 times)

bucksnort Full Member Offline Posts: 148 Location: Vancouver, WA Joined: Jun 8^th, 2014	Mold question May 23^rd, 2017 at 5:17pm	Print Post
	I have a 32-20CPA on order. Who else besides Hoch builds a decent 'tapered' mold for this caliber? I'm also a beginner to this game, so any ideas will help.


	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7675 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Mold question Reply #1 - May 23^rd, 2017 at 6:42pm	Print Post
	NOE has this one, it's a copy of a Paul Jones Mold, for a 14 twist. (You need to *Login* or *Register* to view media files and links) Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

Win85 Participating Member Offline Posts: 36 Location: Bluegrass Joined: Mar 30^th, 2017	Re: Mold question Reply #2 - May 25^th, 2017 at 9:56pm	Print Post
	Accurate makes fine molds


	IP Logged

Pentz Senior Forum Member Offline Funf und Zwanzig mit den Hut Posts: 435 Location: Vancouver, WA Joined: Sep 4^th, 2014	Re: Mold question Reply #3 - May 27^th, 2017 at 2:38pm	Print Post
	Ed, I have that NOE mold; you are welcome to borrow it to see how it shoots for you. So far my Hoch shoots best for my rifle. frnkeore wrote on May 23^rd, 2017 at 6:42pm: NOE has this one, it's a copy of a Paul Jones Mold, for a 14 twist. (You need to *Login* or *Register* to view media files and links) Frank

	ASSRA Member Yoostabe # 11497
	IP Logged

bucksnort Full Member Offline Posts: 148 Location: Vancouver, WA Joined: Jun 8^th, 2014	Re: Mold question Reply #4 - May 30^th, 2017 at 3:51am	Print Post
	Mike, I would like to cast a handful of bullets from that mold. That way, when my rifle arrives, I can start my journey. I'll be at the range on Wednesday. Ed


	IP Logged

Pentz Senior Forum Member Offline Funf und Zwanzig mit den Hut Posts: 435 Location: Vancouver, WA Joined: Sep 4^th, 2014	Re: Mold question Reply #5 - May 30^th, 2017 at 2:15pm	Print Post
	See you there late a.m.

	ASSRA Member Yoostabe # 11497
	IP Logged

40_Rod Frequent Elocutionist Offline Extremism in the persuit of accuracy is not a vice Posts: 4285 Location: Knoxville, TN Joined: Apr 20^th, 2004	Re: Mold question Reply #6 - May 31^st, 2017 at 8:12am	Print Post
	What you are asking depends on a lot of variables, Who's barrel, what twist, what is the dimentions of the throat, all of this will go into a sucessfull bullet choice. To start I would ask Paul and Gail what they recommend. They carry molds and keep a stock of the molds that are suited to their products. 40 Rod


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.8811 seconds.