ASSRA Forum › General › Collecting Single Shot Rifles › remington hepburn help needed
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2] 3  Send TopicPrint
Very Hot Topic (More than 25 Replies) remington hepburn help needed (Read 16221 times)
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: remington hepburn help needed
Reply #15 - Jun 23rd, 2017 at 7:18pm
Print Post  
The screw protruding through the lower tang told me it likely was missing, and someone put a smaller screw through the hole and likely a nut on the bottom. If the threads were good, that would be an easy fix. 
Front sight might be a windage adjustable, and the globe missing. So maybe the tape was to retain the base and adjusting screw together?
Hard to see a double set trigger in that configuration, and not think it was a bargain for under $1700 total out the door.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2921
Location: Southern NJ
Joined: Aug 1st, 2010
Re: remington hepburn help needed
Reply #16 - Jun 24th, 2017 at 9:37am
Print Post  
Should not be a problem for parts. Looks like Numrich has the repro windage-adjust front sight back in stock (might have to buy all the parts and put together yourself - not a big deal) and DZ Arms will have all the needed screws (that's whatever they came up with for the main-spring screw sticking out of the lower tang - looks to be much smaller than the original, so there is hope for the threads) and any other parts required. Looks like it will clean up into a beautiful rifle.
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: remington hepburn help needed
Reply #17 - Jun 24th, 2017 at 10:50pm
Print Post  
SSShooter wrote on Jun 24th, 2017 at 9:37am:
Should not be a problem for parts. Looks like Numrich has the repro windage-adjust front sight back in stock.


But are those new front sights the same wide dovetail the originals had? Or did they go standard 3/8" on the new sights?
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
.22Hepburn
Oldtimer
*****
Offline



Posts: 803
Location: Pennsylvania
Joined: Feb 18th, 2008
Re: remington hepburn help needed
Reply #18 - Jun 28th, 2017 at 7:54pm
Print Post  
"Sold for $1400" - someone got a very good deal.
  
Back to top
Facebook  
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2921
Location: Southern NJ
Joined: Aug 1st, 2010
Re: remington hepburn help needed
Reply #19 - Jun 28th, 2017 at 8:09pm
Print Post  
marlinguy wrote on Jun 24th, 2017 at 10:50pm:
SSShooter wrote on Jun 24th, 2017 at 9:37am:
Should not be a problem for parts. Looks like Numrich has the repro windage-adjust front sight back in stock.


But are those new front sights the same wide dovetail the originals had? Or did they go standard 3/8" on the new sights?

Not sure. Mine is with Steve Durren to be installed on the new barrel he is fitting to one of my Hepburns. It is supposed to be an accurate repro, but a call to Numrich might get you the answer. Think Deadeye Bly (John) also has one. You could ask him.
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: remington hepburn help needed
Reply #20 - Jun 29th, 2017 at 9:27am
Print Post  
I bought quite a few NOS Numrich parts from the Rolling Block late 1990's parts they got from Remington. Building a pistol grip RB using the parts, and so far the parts are all correct for early BP Rolling Blocks. They were listed as "out of stock" on some front sight parts, and I got the last set of tang sight parts. Hopefully they kept the front sight the same as old dovetail size, but I'm betting they went 3/8".
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: remington hepburn help needed
Reply #21 - Jun 29th, 2017 at 1:20pm
Print Post  
It looks like the base might be present.
Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2921
Location: Southern NJ
Joined: Aug 1st, 2010
Re: remington hepburn help needed
Reply #22 - Jun 29th, 2017 at 1:35pm
Print Post  
marlinguy wrote on Jun 29th, 2017 at 9:27am:
Hopefully they kept the front sight the same as old dovetail size, but I'm betting they went 3/8".

Call or PM Steve Durren and ask. Feel sure he wouldn't mind measuring the dovetail on mine as long as you are not in a hurry. He has to cut the dovetail in my barrel over the next several weeks, so not a big deal for him (says the guy who doesn't have to dig it out and measure). They are sold as 'original', so would be interesting to know.
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: remington hepburn help needed
Reply #23 - Jun 29th, 2017 at 2:04pm
Print Post  
Would someone post a link to the sight parts please?
Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: remington hepburn help needed
Reply #24 - Jul 1st, 2017 at 4:38pm
Print Post  
Would someone post a link to the sight parts please?
Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: remington hepburn help needed
Reply #25 - Jul 1st, 2017 at 5:31pm
Print Post  
Rebel wrote on Jul 1st, 2017 at 4:38pm:
Would someone post a link to the sight parts please?
Aaron


The sight parts aren't separated out Aaron. They can be found here under the #1 Rolling Block parts. Items #24 thru #32.:

(You need to Login or Register to view media files and links)
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Deadeye Bly
Frequent Elocutionist
*****
Offline



Posts: 1067
Location: Stephens City
Joined: Feb 25th, 2011
Re: remington hepburn help needed
Reply #26 - Jul 1st, 2017 at 8:47pm
Print Post  
I bought one of the sights in parts and got it assembled OK. It's kinda tight but I figure it will work loose. It's the large dovetail, about .450". I can't measure it, it's on a barrel already. I've got several sight inserts ordered from Distant Thunder. I've been told they were the Axtell sights???
  
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: remington hepburn help needed
Reply #27 - Jul 1st, 2017 at 9:16pm
Print Post  
Thanks guys,
Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16274
Location: Oregon
Joined: Feb 2nd, 2009
Re: remington hepburn help needed
Reply #28 - Jul 2nd, 2017 at 11:08am
Print Post  
Originals can vary a fair amount in Remington rifles! Mine are anywhere from .451" to .461"! So if it's the smaller end of the spectrum, do a careful check before spending the money!
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2921
Location: Southern NJ
Joined: Aug 1st, 2010
Re: remington hepburn help needed
Reply #29 - Jul 2nd, 2017 at 2:49pm
Print Post  
If a bit too small a little bit of work with a file and some shim-stock will will make it fit nice & tight.
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
Page Index Toggle Pages: 1 [2] 3 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5399 seconds.