ASSRA Forum › General › Single Shot Rifles › Trapdoor model 1878, cracked tang
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Trapdoor model 1878, cracked tang (Read 5324 times)
craigster
Oldtimer
*****
Offline



Posts: 677
Location: lost coast CA
Joined: Feb 20th, 2011
Re: Trapdoor model 1878, cracked tang
Reply #15 - Apr 18th, 2017 at 11:42pm
Print Post  
[quote author=5F68697A64636A0D0 link=1492051254/13#13 date=1492448367]
No on the Silver Solder !!!  It take's too much heat and will never be blued like the rest of the metal !!! 

TIG weld the two part's and you can control the outcome better !!! 

Good Luck !!!

Redwing !!![/quote]


Yes, TIG  would be good. As far as the silver soldering requiring too much heat, you don't know what you're talking about.
  
Back to top
 
IP Logged
 
arlon
Participating Member
*
Offline



Posts: 43
Joined: Mar 29th, 2017
Re: Trapdoor model 1878, cracked tang
Reply #16 - Apr 19th, 2017 at 10:50pm
Print Post  
I'll have to start looking for another one. If they aren't matched to the gun, that makes it easier. 
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9977 seconds.