ASSRA Forum › General › Reloading the Single Shot Rifle › 40-85 & 40-90 NECK SIZER DIE
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) 40-85 & 40-90 NECK SIZER DIE (Read 3801 times)
KFW
Oldtimer
*****
Offline



Posts: 641
Location: Wyoming
Joined: Dec 18th, 2016
40-85 & 40-90 NECK SIZER DIE
Apr 5th, 2017 at 1:50pm
Print Post  
hello all
i am not having much fun making the 40-70 neck sizer die work for these longer cases for my ballard.. my question to all is if some is making a longer die body so i can use the positive adjustment stop ring that comes with the extra length. lyman makes the .45 die in a long and short.........wheres the .40?
regards
kw
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2944
Location: Southern NJ
Joined: Aug 1st, 2010
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #1 - Apr 6th, 2017 at 6:31am
Print Post  
Talk to CH4D. They will make anything you want in the way of a die. Won't be fast or cheap, but you'll get what you ask for.
  
Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
ireload2
Full Member
***
Offline



Posts: 169
Joined: Jul 9th, 2009
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #2 - Apr 6th, 2017 at 1:17pm
Print Post  
It is called a .416 Remington....
Most FL sizing dies size the neck about .007 too small so the various .416 dies might work for your neck die.  The body of the magnum round is large enough to clear your case body.
You will be able to use an expander ball if you prefer that too. 

A Lee FL die body was listed at about $14  or you can buy a used set of dies on ebay.

KFW wrote on Apr 5th, 2017 at 1:50pm:
hello all
i am not having much fun making the 40-70 neck sizer die work for these longer cases for my ballard.. my question to all is if some is making a longer die body so i can use the positive adjustment stop ring that comes with the extra length. lyman makes the .45 die in a long and short.........wheres the .40?
regards
kw

  
Back to top
 
IP Logged
 
KFW
Oldtimer
*****
Offline



Posts: 641
Location: Wyoming
Joined: Dec 18th, 2016
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #3 - Apr 6th, 2017 at 6:04pm
Print Post  
Hmmm......
a .416 remington, i wish i had a cartridge to view. there is a lee factory crimp die on ebay for $11.50. i can't tell by looking at it if it would be long enough to touch shell holder, or have enough threads to set lock ring at top of my rock chucker ram to control length of size, the price sure is tempting! i will look at a saami dwg. i called ch4d, their bushing die is $66...not too bad.
guess i need to do more homework.
regards.
kw
  
Back to top
 
IP Logged
 
ireload2
Full Member
***
Offline



Posts: 169
Joined: Jul 9th, 2009
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #4 - Apr 6th, 2017 at 8:14pm
Print Post  
The .416 Remington case is 2.850 long.

I am not sure why you are looking at the Lee FCD because they do not size the neck they only crimp the case mouth.

I just checked my very similar but shorter Lee FL die in .416 Taylor. 
The sizing section of the neck is .436 diameter so it will not be small enough to adequately size for a .408 or smaller bullet unless your brass is really thick. 

KFW wrote on Apr 6th, 2017 at 6:04pm:
Hmmm......
a .416 remington, i wish i had a cartridge to view. there is a lee factory crimp die on ebay for $11.50. i can't tell by looking at it if it would be long enough to touch shell holder, or have enough threads to set lock ring at top of my rock chucker ram to control length of size, the price sure is tempting! i will look at a saami dwg. i called ch4d, their bushing die is $66...not too bad.
guess i need to do more homework.
regards.
kw

  
Back to top
 
IP Logged
 
beltfed
Frequent Elocutionist
*****
Offline



Posts: 1827
Location: Central Wi
Joined: Dec 20th, 2007
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #5 - Apr 6th, 2017 at 9:08pm
Print Post  
KFW,
What loading press do you have?
My RCBS Rock Chucker has a threaded 7/8-14 insert in it
that can be backed off. I think it is 1 1/8 or 1 1/4" thread on its O.D.. A person can use large flat washers under its flange to secure it in a higher position.
By doing so, this will effectively back off
the 40-70 neck die, perhaps far enough to serve ok
on those 40-85 or 40-90 cases.

beltfed/arnie
  
Back to top
 
IP Logged
 
MartiniBelgian
Frequent Elocutionist
*****
Offline



Posts: 1734
Location: Aarschot
Joined: Jun 7th, 2004
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #6 - Apr 7th, 2017 at 3:26am
Print Post  
Just get a CH4D bushing necksizer, the bushings are available in different sizes.  Much easier than trying to make do with something else.
  
Back to top
WWW  
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7734
Location: Virginia
Joined: Apr 23rd, 2004
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #7 - Apr 7th, 2017 at 6:31am
Print Post  
CH4D stock item about 60 bucks and few days shipping. Were you will spend more is buying extra size bushings at 12 dollars each. Start sizing perfect want to tweak neck tension with a little bit different size. It's trial by feel small difference one bushing to another.  You can even adjust tension for different brass neck wall thickness.  Send Dave at CH4D fired case and a bullet he will get the bushing very close first try.

Neck size only way to go for fixed.

Boats
« Last Edit: Apr 7th, 2017 at 6:39am by boats »  
Back to top
 
IP Logged
 
KFW
Oldtimer
*****
Offline



Posts: 641
Location: Wyoming
Joined: Dec 18th, 2016
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #8 - Apr 7th, 2017 at 8:16am
Print Post  
well gentlemen,
based on your wisdom, ch4d is the way to go here. since i have two  .40 cal ballards it makes sense to go this route.

thank you all
kw
  
Back to top
 
IP Logged
 
rustyrelx
Senior Forum Member
****
Offline



Posts: 474
Location: Wallace Idaho
Joined: Oct 9th, 2007
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #9 - Apr 12th, 2017 at 2:51pm
Print Post  
just use the .41 mag dies work just fine.   Don
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18101
Location: Oregon
Joined: Feb 2nd, 2009
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #10 - Apr 12th, 2017 at 4:43pm
Print Post  
Never saw a mention of which way you wanted to move the neck? Is it too large and you need to size it down? Or too small and want to expand it?
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
KFW
Oldtimer
*****
Offline



Posts: 641
Location: Wyoming
Joined: Dec 18th, 2016
Re: 40-85 & 40-90 NECK SIZER DIE
Reply #11 - Apr 17th, 2017 at 8:53pm
Print Post  
marlin guy and rustyrlex
i missed your recent reply...yes i want to reduce case diameter. the 41 mag may work, but die is to short to use with out cobbling up sort sort of positive, repeatable ram travel stop? split collar w/screws or open sided u-shape sleeve...dunno?
thanks
kw
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5483 seconds.