ASSRA Forum › General › Reloading the Single Shot Rifle › Re: 45-90 Jamison brass
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Re: 45-90 Jamison brass (Read 1718 times)
nuclearcricket
Oldtimer
*****
Offline



Posts: 824
Joined: Oct 15th, 2008
Re: 45-90 Jamison brass
Mar 5th, 2017 at 11:36pm
Print Post  
I will take a guess and say no. I don't use any brass that size but the 44-77 brass that I have from them is very soft in the neck/shoulder area, to the point that I dropped a case from about waist height onto the hard ground on a firing point and it dented the case mouth. 
Sam
  
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1222
Location: CT
Joined: Dec 14th, 2008
Re: 45-90 Jamison brass
Reply #1 - Mar 6th, 2017 at 10:10am
Print Post  
no need to anneal    plenty soft    art
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1802 seconds.