ASSRA Forum - some work going out at Crossno's

ASSRA Forum › General › Rifle Photos › some work going out at Crossno's

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

some work going out at Crossno's (Read 5834 times)

roller64 Participating Member Offline Posts: 20 Location: oklahoma Joined: Mar 26^th, 2014	some work going out at Crossno's Feb 5^th, 2017 at 12:01am	Print Post
	Just a little Shameless Promoting. Hope ya'll don't mind .We finished these up last week low wall is going home to owner. Ballard is goin to the checkering bench . low wall came in for reline and new wood and colors. ballard came in for new wood and a lot of issues it had from not so natural couses (if ya know what I mean )and some color.
	« Last Edit: Feb 5^th, 2017 at 12:34am by roller64 »

	Facebook IP Logged

singleshotsam Oldtimer Offline Posts: 551 Location: Silver City NM Joined: Jan 15^th, 2009	Re: some work going out at Crossno's Reply #1 - Feb 5^th, 2017 at 8:40am	Print Post
	Excellent work, and you need to promote your services. There are fewer riflesmiths willing to take on single shot repairs or restoration these days. We need to keep these old classics in good repair and on the firing line or hunting fields. SSS


	IP Logged

jhm Frequent Elocutionist Offline Posts: 1403 Location: georgia Joined: Sep 4^th, 2011	Re: some work going out at Crossno's Reply #2 - Feb 5^th, 2017 at 8:50am	Print Post
	Need to give these folks your business...... I called about a Peabody stock and they were so helpful. They had military and sporting styles(who knew?).Gonna be placing an order shortly. JMH


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 15994 Location: Oregon Joined: Feb 2^nd, 2009	Re: some work going out at Crossno's Reply #3 - Feb 5^th, 2017 at 9:38am	Print Post
	Both excellent Mike! I'm sure the owners will be very pleased with what you fellas have done!

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

ssrifles Senior Forum Member Offline Posts: 271 Joined: Mar 23^rd, 2009	Re: some work going out at Crossno's Reply #4 - Feb 5^th, 2017 at 11:37am	Print Post
	mike glad to see you're hard at it.keep it up you will do good.tell pam hi tony <><


	IP Logged

Crown-C Senior Forum Member Offline Posts: 487 Location: St. Marys Kansas Joined: Apr 6^th, 2009	Re: some work going out at Crossno's Reply #5 - Feb 5^th, 2017 at 12:10pm	Print Post
	A couple of fine looking rifles! What always amazes me is the wood to metal fitting you guys do. It is perfect in every Ballard, Hi-Wall or Hepburn you have done for me. By the way I now have an original Hepburn barrel for the action I bought from you.I need to get it to you before long so you can do the headspace and fit. Plus pick out some great wood for you to do your magic on! Richard

	Richard Crown-C Ranch in the Flinthills NRA Life Member ASSRA Member # 10366 Member & Founders Society, Cody Firearms Museum Veteran
	IP Logged

SgtDog0311 Senior Forum Member Offline Posts: 375 Joined: Mar 19^th, 2014	Re: some work going out at Crossno's Reply #6 - Feb 5^th, 2017 at 12:23pm	Print Post
	Hey Mike, John Madden here, your neighbor to the south. I enjoyed the shameless promoting! Wouldn't mind installments. Glad to see your swept the floors for those pictures Got hopes for another Roller some day. Btw... still got my plug for the liner. Need a pat on the head for that. See you at our BPCR before too long. John

	Best Regards, John
	IP Logged

Bonner Full Member Offline Posts: 135 Location: middle georgia Joined: Mar 2^nd, 2015	Re: some work going out at Crossno's Reply #7 - Feb 5^th, 2017 at 12:27pm	Print Post
	I would like to say that I contacted Mike with questions on two rollers that I have, for evaluation of these rifles for safety and relining. Sent the rifles to mike on Jan. 26th. He has already replied that 1 rifle is unsafe!! Due to poor workmanship. The 2nd rifle is in good working order. I can tell you that they are running the business as if Dave was there. I'm sure he is in spirit. Bonner


	IP Logged

watchthewind Oldtimer Offline Posts: 936 Location: Phoenix, AZ Joined: Mar 10^th, 2015	Re: some work going out at Crossno's Reply #8 - Feb 5^th, 2017 at 11:14pm	Print Post
	That is some really good looking work. I'm glad to see you running and putting out good work Scott

	ASSRA Member # 11408
	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2917 Location: Southern NJ Joined: Aug 1^st, 2010	Re: some work going out at Crossno's Reply #9 - Feb 6^th, 2017 at 10:34am	Print Post
	Beautiful. And especially appreciate your work bench. Makes mine look almost 'reasonable'. As I tell the wife, a clean & organized workspace is the sign of a sick mind.

	Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
	GTalk IP Logged

roller64 Participating Member Offline Posts: 20 Location: oklahoma Joined: Mar 26^th, 2014	Re: some work going out at Crossno's Reply #10 - Feb 10^th, 2017 at 10:57am	Print Post
	Thank you for all the encouragement . well I don't have to worry about idle hands with a bench like that look you can see my bench
	« Last Edit: Feb 10^th, 2017 at 11:10am by roller64 »

	Facebook IP Logged

.22Hepburn Oldtimer Offline Posts: 803 Location: Pennsylvania Joined: Feb 18^th, 2008	Re: some work going out at Crossno's Reply #11 - Feb 10^th, 2017 at 9:02pm	Print Post
	Great work as always Mike. Been thinking about my/your next project. I really need a Creedmoor pattern #2 Roller to go with the 45-90 (built on a #5 action, receiver pistol-gripped) 32" full octagon barrel, with set trigger and E-Grade checkering on that outrageous checkerboard pattern wood and the matching one built on a 1 1/2 action in .22LR. This will be an amazing set of Rollers, to go with the other #2 Rollers you built for me. Can't have too many Rollers.


	Facebook IP Logged

.22Hepburn Oldtimer Offline Posts: 803 Location: Pennsylvania Joined: Feb 18^th, 2008	Re: some work going out at Crossno's Reply #12 - Feb 10^th, 2017 at 9:03pm	Print Post
	Also, looking forward to getting the #3 Ballard receiver that you case-colored for me. Looked really good in the pic you sent.


	Facebook IP Logged

roller64 Participating Member Offline Posts: 20 Location: oklahoma Joined: Mar 26^th, 2014	Re: some work going out at Crossno's Reply #13 - Feb 10^th, 2017 at 9:57pm	Print Post
	found some of that checkerboard with your name on it the other day.


	Facebook IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.5409 seconds.