NOE doesn't do custom mold, unless you can get 10 buyer for the same mold.

This is NOE's only rifle mold in 40 cal:

(You need to Login or Register to view media files and links)

Frank

Take a look at AccurateMolds.com     A lot of us have used them with happy results.  But-----nothing under .30 cal last time I checked, and no spitzers; all his bullets have a small meplat. 
On the good side, if you can live with a very small meplat, you can basically design you own--- or alter specs on one of his existing offerings. 
I have not checked, but there are probably a couple pages of .40+ molds.

I've got half a dozen or more and not a problem in the lot.

{edited to correct a misspelled word I just noticed-----DAMN ought-toOco-wecked}

Note that Tom at Accurate Bullet Molds will cut the bearing surface to desired diameter -0/ +.002" in your specified alloy (several choices in a pull-down menu) and the nose -.002"/+0, if you want a bore riding bullet without a separate nose sizing step.

NOE makes a push through sizing die that takes inserts of varying sizes, and nose sizing inserts for the same die body for more precise control of a bore-riding nose diameter.

This is a drawing of my Ron Long 40 cal. And what it would look like for a .410 groove.

Frank

G,day,
         Have had a reply back from Steve Brooks,he can make the mould I require,I just need to get the $s together,I wanted a nose pore ,he assured me his base pore will work just fine,it's a two diameter design 1.270 long .500 nose,first 4 bands 0.402 last two 0.410 weight aprox 370gns.Have shot it in my 40/65 R/B with great success but cannot beg or borrow any more ,need my own mould.I might ask Joe to post a pic of the design as I cannot post pics from my iPad ,he has been most kind before .The alloy is 30/1 lead : tin, My barrel is a Douglas 16/1 twist 0.400 bore 0.408 groove.

     Kind Regards Mal.

That's a excellent looking mold, Bob. I like the round nose on it, too. That will make it better when it goes subsonic.

I never really think of Hoch for base pours or spitzers but, that mold looks very nice.

Frank

SS SHOOTER, I am using the saeco 640, it's ok but not a real BS pill,have tried the snover again ok but does not BS all that well either,I have a tapered Lyman 395gn OK at a 100 a bit wild at 200,The match we shoot at Hahndorf SA. is 200yds MOA 2" bull shot either prone or sitting,BP only.I am impressed with the Barco moulds they shoot very well but with only reduced front bands.The pill I want has the first 4bands reduced BS much better.I also like the lighter weight ,with 68-70 gns Wano P a real pussy to shoot.Having said all that I am always willing to try any other pill that may do the job.I was warned when taking up BP it was an evil science . So true!! 

       Cheers Mal.