ASSRA Forum - 25-25 25-21 Stevens loading tools needed.

ASSRA Forum › General › Reloading the Single Shot Rifle › 25-25 25-21 Stevens loading tools needed.

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

25-25 25-21 Stevens loading tools needed. (Read 5277 times)

Nessmuk Junior Member Offline Posts: 65 Location: Tug Hill Joined: Dec 5^th, 2013	25-25 25-21 Stevens loading tools needed. Dec 1^st, 2016 at 8:05pm	Print Post
	Like it says, looking for what I need to put together loaded rounds. Die(s), ideal tool, Lee loader, what ever.

	If everything's looking up, You're on the bottom.
	WWW IP Logged

BP Frequent Elocutionist Offline Posts: 8039 Location: Westside Joined: Aug 27^th, 2006	Re: 25-25 25-21 Stevens loading tools needed. Reply #1 - Dec 1^st, 2016 at 8:09pm	Print Post
	Where is your 25-25 or 25-21 Stevens brass coming from?

	There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves. Proud Noodlehead
	IP Logged

StevenHall Junior Member Offline Posts: 92 Location: Cave Creek, AZ Joined: Sep 23^rd, 2014	Re: 25-25 25-21 Stevens loading tools needed. Reply #2 - Dec 1^st, 2016 at 8:17pm	Print Post
	CH4D makes dies for a standard press.


	IP Logged

Nessmuk Junior Member Offline Posts: 65 Location: Tug Hill Joined: Dec 5^th, 2013	Re: 25-25 25-21 Stevens loading tools needed. Reply #3 - Dec 1^st, 2016 at 8:54pm	Print Post
	25-basic brass. The CH4D dies are painfull expensive.

	If everything's looking up, You're on the bottom.
	WWW IP Logged

StevenHall Junior Member Offline Posts: 92 Location: Cave Creek, AZ Joined: Sep 23^rd, 2014	Re: 25-25 25-21 Stevens loading tools needed. Reply #4 - Dec 1^st, 2016 at 9:31pm	Print Post
	$103 for a 3 die set isn't cheap, but you might not be able to do much better. I paid $75 for my Ideal tool for 25-25 a couple years ago (missing the de-capper like most), and haven't seen another for sale since. Maybe you will be able to find a set of used dies though.


	IP Logged

waterman Frequent Elocutionist Offline Posts: 3003 Location: Behind the Redwood Curtain Joined: Jun 9^th, 2004	Re: 25-25 25-21 Stevens loading tools needed. Reply #5 - Dec 1^st, 2016 at 9:54pm	Print Post
	I think you are looking at an unnecessary expense. These are old-timey single shots. If the cases will enter the chambers of your rifles, all you need is a decapper and something to prime with. An Ideal or Lyman universal decapper die works for my 28-30 and for my 25-20 SS. It should work on the other 25s. I have an old Ideal tong tool in .25-20 WCF that I use to prime my 25-20 SS cases. I use another Ideal tool marked 28 S to prime the 28-30. One bell, one whistle does it.


	IP Logged

John Boy Ex Member	Re: 25-25 25-21 Stevens loading tools needed. Reply #6 - Dec 1^st, 2016 at 9:56pm	Print Post
	25-21 handloader here: * Dies are CH4D * Brass is Rocky Mountain Ctg lathe turned. Don't waste your money on Bertram (is Junk) & Jamison can be iffy


	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: 25-25 25-21 Stevens loading tools needed. Reply #7 - Dec 1^st, 2016 at 10:21pm	Print Post
	Quote: 25-21 handloader here: * Dies are CH4D * Brass is Rocky Mountain Ctg lathe turned. Don't waste your money on Bertram (is Junk) & Jamison can be iffy Certainly agree about Bertram - not about Jamison/Captech. Their .25-20 Stevens brass has been excellent for forming to .22 Lovell. But anyway, last I saw they still aren't making brass for the .25-21. Wish they would. I asked, but they said no, no market.

	<div class=
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 18085 Location: Oregon Joined: Feb 2^nd, 2009	Re: 25-25 25-21 Stevens loading tools needed. Reply #8 - Dec 2^nd, 2016 at 10:35am	Print Post
	Look around at other die set pricing, and C&H4D looks pretty darn cheap! There's not a lot to choose from, but C&H4D has always been 1/3 to 1/2 the price of other brands for obsolete dies.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

ron Oldtimer Offline Posts: 579 Location: Augusta Maine Joined: Nov 15^th, 2009	Re: 25-25 25-21 Stevens loading tools needed. Reply #9 - Dec 2^nd, 2016 at 3:42pm	Print Post
	I just received a set from C&H4C for my .22 Extra Long Maynard along with the shell holder came to $121.02 with shipping. Received them in 3 days. EXCELLANT QUALITY and SERVICE. ron


	IP Logged

ballardhepburnmich ASSRA Board Member Offline Posts: 598 Location: Scotts,mi. Joined: May 20^th, 2015	Re: 25-25 25-21 Stevens loading tools needed. Reply #10 - Dec 3^rd, 2016 at 11:55am	Print Post
	You might want to check to see if your .25 basic brass has the right base dia. and enough length to make .25-21 or .25-25 before you aquire any loading equipment. If those two cartridges can be made correctly rom this basic brass I would like very much to know where you are getting your basic brass. Lee


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›