ASSRA Forum › General › Reloading the Single Shot Rifle › Ultrasonic case cleaning
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Ultrasonic case cleaning (Read 8185 times)
only1shot
Junior Member
**
Offline



Posts: 57
Location: Burton, Michigan
Joined: Mar 27th, 2015
Re: Ultrasonic case cleaning
Reply #15 - Dec 1st, 2016 at 3:16pm
Print Post  
  Hello all: 
   If you go to the Accurateshooter.com site and click on to Technical Articles, there is an article about cleaning cases with an ultrasonic cleaner. The author is cleaning cases fired with smokeless powder, so your mileage may vary.
  I right clicked the arrow 5 times to find the article. The results looked very promising and inexpensive!
Maybe this will help someone.
    Bill.
   
  
Back to top
 
IP Logged
 
noylj
Participating Member
*
Offline



Posts: 16
Joined: Feb 22nd, 2014
Re: Ultrasonic case cleaning
Reply #16 - Dec 2nd, 2016 at 3:18am
Print Post  
Ultrasonic will completely clean a case inside and out in 20 minutes using HOT water, a few drops of Dawn, and some citric acid.
The citric acid will give a slight polish, but nothing like what 6-8 hours with Stainless Steel pins can give.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.3467 seconds.