Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) #4 Rolling Block (Read 9216 times)
BP
Frequent Elocutionist
*****
Offline



Posts: 8039
Location: Westside
Joined: Aug 27th, 2006
Re: #4 Rolling Block
Reply #15 - Oct 27th, 2016 at 5:03pm
Print Post  
John Boy,
Thank you for the clarification about your 32-20 being chambered in a #2, instead of in a #4.
I'm personally feeling safer.     Smiley
That's an interesting thought about the possibility of the #4-S Boy Scout rifle, the #4-S Military Model , and the #4 Cadet rifle possibly being sold as military contract...
  

There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves.
Proud Noodlehead
Back to top
 
IP Logged
 
only1shot
Junior Member
**
Offline



Posts: 57
Location: Burton, Michigan
Joined: Mar 27th, 2015
Re: #4 Rolling Block
Reply #16 - Oct 27th, 2016 at 5:13pm
Print Post  
  Greetings all:
After soaking the barrel in mineral spirits overnight and rubbing lightly with Hoppes#9 and 0000 steel wool, I found a serial number on the underside of the barrel-- 307790 (thank you BP).
I also found on the bottom of the barrel to the rear of the forend mounting screw hole, a set of marks that look like tracks from a track laying tractor. There are 58 of these marks ====== ================= Does anyone know what they are for? 
The barrel is marked  .22  SHORT OR LONG RIFLE. Would anyone know if this would stabilize standard velocity long rifle ammunition? 
Thanks everyone for your help!
     Bill
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16278
Location: Oregon
Joined: Feb 2nd, 2009
Re: #4 Rolling Block
Reply #17 - Oct 27th, 2016 at 5:40pm
Print Post  
John Gyde' mentions serrations on hammer and breechblock began around 315000 in 1923 in his book. So I'd guess your #4 is probably from around that same year.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Nessmuk
Junior Member
**
Offline



Posts: 65
Location: Tug Hill
Joined: Dec 5th, 2013
Re: #4 Rolling Block
Reply #18 - Dec 7th, 2016 at 4:18pm
Print Post  
I would use subsonic, or target ammunition.  Lower pressure like it was designed for.
  

If everything's looking up,
You're on the bottom.
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint