ASSRA Forum › General › Reloading the Single Shot Rifle › 38/55 bullet mould
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 38/55 bullet mould (Read 2850 times)
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1222
Location: CT
Joined: Dec 14th, 2008
38/55 bullet mould
Sep 9th, 2016 at 1:32pm
Print Post  
who would be a good choice for a breach seater style bullet mould for a large bore 38 cal. .373 bore ?  thanks  art
  
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1222
Location: CT
Joined: Dec 14th, 2008
Re: 38/55 bullet mould
Reply #1 - Sep 12th, 2016 at 1:36pm
Print Post  
no help?   art
  
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1301
Location: Arizona
Joined: Sep 8th, 2006
Re: 38/55 bullet mould
Reply #2 - Sep 12th, 2016 at 1:53pm
Print Post  
Try Tru-Bore moulds at:
(You need to Login or Register to view media files and links)
Make a chamber cast and use it to make a drawing (with dimensions) or send Steve Brooks the chamber cast and let him know what you want, i.e., nose style, bullet length, weight, number of lube grooves, etc.
I have had him make 9 moulds for me over the past ten years or so. All have met my needs perfectly.
  
Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
GTalk  
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1222
Location: CT
Joined: Dec 14th, 2008
Re: 38/55 bullet mould
Reply #3 - Sep 12th, 2016 at 2:28pm
Print Post  
thanks  randy
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2944
Location: Southern NJ
Joined: Aug 1st, 2010
Re: 38/55 bullet mould
Reply #4 - Sep 12th, 2016 at 7:00pm
Print Post  
Have a 325gr BACo Money mold that tosses a 0.378" bullet if you want to try that.
  
Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
JS47
Frequent Elocutionist
*****
Offline



Posts: 1265
Location: Arizona
Joined: Oct 12th, 2012
Re: 38/55 bullet mould
Reply #5 - Sep 12th, 2016 at 10:37pm
Print Post  
art_ruggiero wrote on Sep 9th, 2016 at 1:32pm:
who would be a good choice for a breach seater style bullet mould for a large bore 38 cal. .373 bore ?  thanks  art


.373 bore is pretty large.  What is the groove diameter? Tom at Accurate Molds made me a 260 grain bore-ride bullet for my BRC barrel with a .370 bore .375 groove that shoots like a dream. BRC was using my targets for their adds for awhile, that is until I got upstaged by Ken Lewis! Smiley.  Tom is easy to work with and could fix you up with a bullet mold that should work. 

JS 
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8270 seconds.