ASSRA Forum › General › Reloading the Single Shot Rifle › Query on NOE bullet mold for 40-65
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Query on NOE bullet mold for 40-65 (Read 2464 times)
357Wheelgunner
Newbie
*
Offline



Posts: 7
Joined: Jul 23rd, 2015
Query on NOE bullet mold for 40-65
Jul 3rd, 2016 at 2:36pm
Print Post  
Has anybody used the Noe 412-360-FN  bullet mold in a 40-65? Looks like it might be a good bore riding, two driving band bullet to use for short range work, say 200 yard or less.

(You need to Login or Register to view media files and links)

Any commentary would be appreciated.
  
Back to top
 
IP Logged
 
MT Chambers
Full Member
***
Offline



Posts: 141
Location: Foam Lake, Saskatchewan
Joined: Oct 3rd, 2011
Re: Query on NOE bullet mold for 40-65
Reply #1 - Jul 3rd, 2016 at 2:39pm
Print Post  
Normally gc designs are not used in the 40/65, unless smokeless.
  
Back to top
 
IP Logged
 
357Wheelgunner
Newbie
*
Offline



Posts: 7
Joined: Jul 23rd, 2015
Re: Query on NOE bullet mold for 40-65
Reply #2 - Jul 3rd, 2016 at 2:54pm
Print Post  
MT Chambers wrote on Jul 3rd, 2016 at 2:39pm:
Normally gc designs are not used in the 40/65, unless smokeless.


Sorry, I should have specified that I would be machining out the gc step and thus converting them to plain base.
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2942
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Query on NOE bullet mold for 40-65
Reply #3 - Jul 4th, 2016 at 8:09am
Print Post  
The Saeco #640 is quite similar and would not require any machining. Shoots well in my 40-65 at 200yd.
  
Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
ireload2
Full Member
***
Offline



Posts: 169
Joined: Jul 9th, 2009
Re: Query on NOE bullet mold for 40-65
Reply #4 - Jul 4th, 2016 at 9:55pm
Print Post  
I use the NEI bullet intended for the 405 Win in my 40-65. 
It is a 300 gas check and it is exceptionally accurate. 
Though intended for the .405 Win it only cast at .410 dia. and I shoot it at .410. 
A .410 die barely touches the bullet when I lube it.

The mold is NEI #206.
« Last Edit: Jul 4th, 2016 at 11:13pm by ireload2 »  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8920 seconds.