ASSRA Forum › General › Reloading the Single Shot Rifle › load for 25/20
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic load for 25/20 (Read 1613 times)
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1222
Location: CT
Joined: Dec 14th, 2008
load for 25/20
Jul 1st, 2016 at 11:08am
Print Post  
what is a good replacement for 4759 in 25/20 ss?  i have been shooting 7.3 of 4759 with a 105 gr bullet but supply is almost gone.   art
  
Back to top
 
IP Logged
 
KAF
Ex Member


Re: load for 25/20
Reply #1 - Jul 1st, 2016 at 11:24am
Print Post  
Re: Schuetzen Loads 
Reply #17 - 12/13/07 at 9:36pm
Quote Report PostPrint Post   
25/20 SS.    
7.5 gr of IMR 4227. No wad. 112 gr Pope style tapered bullet is breech seated in the rifling ahead of the case. Fed SR match primer. 
This load is very accurate in my cast iron Ballard. It is also a very low pressure load. Safe in any sound Ballard or original low wall Winchester.  Joe.

25-21 Stevens on a CPA with Shilen barrel, and a 1 in 12 twist.  Hoch pope style bullet at 105 grains.  Bullet is breach seated ahead of 8 grains of AA #9.  There is a floral wad .25 inch ahead of the powder and a cork wad to top the thing off.  Shoots very well on a calm day.

Found under loads.     (You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1222
Location: CT
Joined: Dec 14th, 2008
Re: load for 25/20
Reply #2 - Jul 1st, 2016 at 1:40pm
Print Post  
thanks  keith    art
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.4595 seconds.