ASSRA Forum - Stevens 25-20 single shot

ASSRA Forum › General › Single Shot Rifles › Stevens 25-20 single shot

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1 2 3 [4]

Very Hot Topic (More than 25 Replies)

Stevens 25-20 single shot (Read 25108 times)

JerryB Participating Member Offline Posts: 21 Joined: Jun 2^nd, 2016	Re: Stevens 25-20 single shot Reply #45 - Jun 17^th, 2016 at 3:43pm	Print Post
	Also...uscra112 suggested looking at the link. If it's been brazed wouldn't that mean it's heat treatment has been ccompromised? Provided it had any to start with. Should I just located another one?? Sounds reasonable to do so. Thoughts anyone??? Btw.....what is the exact name of the "link"? I'd be willing to bet it has at least a 2 word name. Lol


	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens 25-20 single shot Reply #46 - Jun 17^th, 2016 at 4:18pm	Print Post
	It's the hammer that has braze on it, and yes, the case hardening is doubtless compromised. I suggested that the finger on the link is too short. Once a good hammer is in place you can assess. Also likely that the holes in the link are worn. I can make you a link if you need one. Used ones are rarely any good. BTW it's just called a "link". No fancy name.
	« Last Edit: Jun 17^th, 2016 at 5:23pm by uscra112 »
	<div class=
	IP Logged

JerryB Participating Member Offline Posts: 21 Joined: Jun 2^nd, 2016	Re: Stevens 25-20 single shot Reply #47 - Jun 17^th, 2016 at 8:14pm	Print Post
	Uscra112.. If you take a look at the second series of pics I posted yesterday you will see that what I think is the link also has brass on it. Unless I'm not looking at the link but rather something else.


	IP Logged

JerryB Participating Member Offline Posts: 21 Joined: Jun 2^nd, 2016	Re: Stevens 25-20 single shot Reply #48 - Jun 17^th, 2016 at 8:46pm	Print Post
	I'm bidding on this link as well.


	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens 25-20 single shot Reply #49 - Jun 17^th, 2016 at 10:19pm	Print Post
	I just sent you what is now a redundant P/M, Jerry. But take your link out and compare the outline with that one on eBay. There are some that have a different outline, depending on what scheme they used to keep the lever from drooping.

	<div class=
	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens 25-20 single shot Reply #50 - Jun 17^th, 2016 at 10:32pm	Print Post
	JerryB wrote on Jun 17^th, 2016 at 3:31pm: I'm bidding on the hammer shown in the above link and a trigger. Hopefully I'll get at least the hammer. But....The trigger pin does not look like mine. Mine is a screw with a smaller screw tightened into the end opposite the pins' head. Is that a wrong trigger?? You're confusing the lever pivot with the trigger pivot screw. The lever pivot and the breechblock pivots from about 1900 on had the screw in the end to hold them in place. The trigger pivot was always a plain screw, and as far as I can determine it never changed for the life of the model. If this one I see on eBay is the one you are bidding on, it's the right trigger. (You need to *Login* or *Register* to view media files and links)

	<div class=
	IP Logged

JerryB Participating Member Offline Posts: 21 Joined: Jun 2^nd, 2016	Re: Stevens 25-20 single shot Reply #51 - Jun 18^th, 2016 at 12:41am	Print Post
	Yes. Upon closer inspection of my loose parts you are correct. So...apparently there are different links. Oh goody. More confusion. Just keeps getting better and better.


	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens 25-20 single shot Reply #52 - Jun 18^th, 2016 at 11:15am	Print Post
	JerryB wrote on Jun 18^th, 2016 at 12:41am: Yes. Upon closer inspection of my loose parts you are correct. So...apparently there are different links. Oh goody. More confusion. Just keeps getting better and better. Just keep thinking of the satisfaction you'll feel when you get it all sorted out !

	<div class=
	IP Logged

JerryB Participating Member Offline Posts: 21 Joined: Jun 2^nd, 2016	Re: Stevens 25-20 single shot Reply #53 - Jun 19^th, 2016 at 9:16pm	Print Post
	I won 3 items on ebay. Hammer and screw, trigger and screw, and a link. As soon as I get a total for those items I am sending payment. Will keep everyone posted as to my progress. Thanks again.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16064 Location: Oregon Joined: Feb 2^nd, 2009	Re: Stevens 25-20 single shot Reply #54 - Jun 19^th, 2016 at 10:44pm	Print Post
	I won the Stevens items, along with the Ballard hammers, links, and the other hammer I'm unsure of? So looks like you've now got enough pieces to make a major step forward on your rebuild Jerry! Anybody know what that hammer fits? (sitting next to the two Ballard links) (You need to *Login* or *Register* to view media files and links)

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: Stevens 25-20 single shot Reply #55 - Jun 19^th, 2016 at 11:26pm	Print Post
	Vall, since Jerry already won his hammer and trigger, I'll offer to take the Stevens parts off your hands if that suits you. Phil

	<div class=
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16064 Location: Oregon Joined: Feb 2^nd, 2009	Re: Stevens 25-20 single shot Reply #56 - Jun 20^th, 2016 at 2:28pm	Print Post
	uscra112 wrote on Jun 19^th, 2016 at 11:26pm: Vall, since Jerry already won his hammer and trigger, I'll offer to take the Stevens parts off your hands if that suits you. Phil Waiting to see if Jerry still wants all the Stevens parts. If he doesn't, I'm happy to sell whatever is Stevens in the batch. I have no Stevens anymore. Sold my last two Stevens schuetzen rifles at the Denver show last month.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7261 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Stevens 25-20 single shot Reply #57 - Jul 4^th, 2016 at 1:56pm	Print Post
	I'm also interested in the Stevens parts, especially the ejector (if marked 22) and would like to have one of the "bolts" (upper one) also. Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

JerryB Participating Member Offline Posts: 21 Joined: Jun 2^nd, 2016	Re: Stevens 25-20 single shot Reply #58 - Aug 21^st, 2016 at 3:44pm	Print Post
	As soon as I can get some medical issues and bills taken care of I'm getting back to this old rifle. Thanks for all the help and info so far.


	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2917 Location: Southern NJ Joined: Aug 1^st, 2010	Re: Stevens 25-20 single shot Reply #59 - Aug 30^th, 2016 at 8:49am	Print Post
	Interesting thread. JerryB - in the meantime you could start doing some judicious work on the receiver getting it cleaned up with a flat-file, etc. You'll eventually want to look as good as it is going to shoot.

	Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
	GTalk IP Logged

Page Index Toggle

Pages: 1 2 3 [4]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.8256 seconds.