ASSRA Forum - MagnetoSpeed Chronographs

ASSRA Forum › General › Reloading the Single Shot Rifle › MagnetoSpeed Chronographs - Connects to Barrel

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

MagnetoSpeed Chronographs - Connects to Barrel (Read 4136 times)

John Boy Ex Member	MagnetoSpeed Chronographs - Connects to Barrel May 24^th, 2016 at 8:41pm	Print Post
	I bought the Sporter & the XFR Interface to a iPhone (You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) Test example of download to iPhone and sent to my email. Also can be save as an Exel file. No more tripod & screens MagnetoSpeed XFR Results... Series: Test Device: none Sensitivity: n/a Units: n/a Shots: -- Max : -- Min : -- ES : -- Avg : -- SD : -- (You need to *Login* or *Register* to view media files and links)


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1826 Location: Central Wi Joined: Dec 20^th, 2007	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #1 - May 24^th, 2016 at 8:57pm	Print Post
	John Boy, Its always nice to be able to Chrono and at the same time shoot groups "to match" the velocity data. It will be interesting to learn if this devise hanging on the barrel will affect the accuracy or point of impact. I have seen some comments to that . beltfed/arnie


	IP Logged

Nick_of_Time Participating Member Offline Posts: 19 Joined: Jul 19^th, 2012	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #2 - May 25^th, 2016 at 12:26am	Print Post
	I've been using one of these on my .45-70 rolling block for BP loads for a few months now. Overall I'm very happy with it. A few hints though. 1) it gets covered in bullet lube. Not a big deal, but plan on cleaning off after an hour or so of shooting. Bring rags to the range. 2) the velocity readings are consistent with my old tripod chromo, but the SDs tend to be a lot lower, probably because it's much closer to the muzzle. on my tripod chromo if I got readings in the high single digits I was happy. With the Magnetospeed, the equivalent is SDs of 2 or 3. With the same load. 3) it causes the bullets impact to vary, but in a consistent and predictable way. That is, the group size is the same, but on my gun it's 2-3" higher than without the unit. And finally 4) It makes my old, single-shot gun with the 2-foot scope look even weirder. Nobody has actually asked me if it was a bayonet, but you can tell, some them are thinking it. Overall - I'm very happy with the purchase. My tripod chromo was too cheap and was always frustrating me. The Magnetospeed is great! -Nick


	IP Logged

John Boy Ex Member	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #3 - May 25^th, 2016 at 8:57am	Print Post
	Quote: It will be interesting to learn if this devise hanging on the barrel will affect the accuracy or point of impact. Arnie: my procedure is: * Chronograph readings for work up powder charges, then * Shoot the work ups for group So the chrono hanging on the end of the barrel is not a concern.


	IP Logged

gunlaker Frequent Elocutionist Offline Posts: 2607 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #4 - May 25^th, 2016 at 10:10am	Print Post
	Nick does the thing ever get knocked loose from recoil? Does it interfere with the front sight? Thanks, Chris.


	IP Logged

Marlene Senior Forum Member Offline Posts: 276 Joined: Oct 30^th, 2015	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #5 - May 25^th, 2016 at 10:49am	Print Post
	I have had trouble getting one to "see" small bullets moving fairly slowly. Otherwise, it is infinitely more pleasant to use at a public range where setup time in front of the firing line during ceasefires is limited. I've never tried to shoot a group with it on.


	IP Logged

40_Rod Frequent Elocutionist Offline Extremism in the persuit of accuracy is not a vice Posts: 4285 Location: Knoxville, TN Joined: Apr 20^th, 2004	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #6 - May 29^th, 2016 at 8:21am	Print Post
	They work nice as long as you don't mind the change in aim point. 40 Rod


	IP Logged

bnice Frequent Elocutionist Offline Posts: 1964 Location: Iowa Joined: Nov 30^th, 2006	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #7 - May 29^th, 2016 at 8:47pm	Print Post
	I saw the better one is suppose to work with airguns does the cheaper sport model also work with them?


	IP Logged

kkid66 Full Member Offline Posts: 186 Location: central tx Joined: Jun 4^th, 2014	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #8 - May 30^th, 2016 at 9:41am	Print Post
	I love the MagnetoSpeed it allowed me to pick up a like new Oehler cheap from someone wanting new tech.


	IP Logged

Nick_of_Time Participating Member Offline Posts: 19 Joined: Jul 19^th, 2012	Re: MagnetoSpeed Chronographs - Connects to Barrel Reply #9 - May 30^th, 2016 at 1:01pm	Print Post
	It does sometimes get knocked loose by the recoil. After some experimentation, I now cinch it down pretty tight and use all of the slack in the screw tightener. That works. Front sight - I put the scope on when I'm testing loads, so haven't tried it with the globe. I'll put it on at home and see if it interferes. gunlaker wrote on May 25^th, 2016 at 10:10am: Nick does the thing ever get knocked loose from recoil? Does it interfere with the front sight? Thanks, Chris.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›