ASSRA Forum - 40-60 Maynard brass in 40-70SS or 40-65?

ASSRA Forum › General › Reloading the Single Shot Rifle › 40-60 Maynard brass in 40-70SS or 40-65?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

40-60 Maynard brass in 40-70SS or 40-65? (Read 1323 times)

Rebel Frequent Elocutionist Offline Posts: 4292 Location: Rockets and Race Cars Joined: Mar 9^th, 2015	40-60 Maynard brass in 40-70SS or 40-65? Mar 24^th, 2016 at 12:48pm	Print Post
	Hi, I recently bought a set of CH dies in 40-60 Maynard. They came with 110pcs of 30-40 brass formed into 40-60 Maynard. Can i use this brass in my 40-70SS Hepburn, or 40-65 Ballard as is? My COW is far away. Thanks, Aaron

	WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
	IP Logged

Rebel Frequent Elocutionist Offline Posts: 4292 Location: Rockets and Race Cars Joined: Mar 9^th, 2015	Re: 40-60 Maynard brass in 40-70SS or 40-65? Reply #1 - Mar 24^th, 2016 at 5:22pm	Print Post
	Thanks Dave! Aaron

	WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.3996 seconds.